Lynda - Revit 2022 Essential Training for Structure [Metric] (Eric Wing)
File List
- 09 Stairs, Ramps, and Slopes/09.01 - Creating Stairs.mp4 41.2 MB
- 03 Grids and Columns/03.01 - Adding grids to the model.mp4 40.4 MB
- 13 Project Management/13.05 - File Sharing.mp4 38.9 MB
- 11 Schedules and Tagging/11.04 - Creating a Material Takeoff.mp4 34.9 MB
- 13 Project Management/13.01 - Phasing.mp4 33.1 MB
- 05 Steel Framing/05.01 - Adding perimeter beams.mp4 30.3 MB
- 11 Schedules and Tagging/11.01 - Footing Schedules.mp4 30.2 MB
- 16 Structural Loading/16.06 - Configuring Boundary Conditions.mp4 28.2 MB
- 13 Project Management/13.03 - Revisions.mp4 28.1 MB
- 16 Structural Loading/16.03 - Configuring Analytical Settings.mp4 27.6 MB
- 14 The Steel Tab/14.08 - Adding Welds and Symbols.mp4 26.4 MB
- 02 Setting Up the Project/02.02 - Creating levels.mp4 26.0 MB
- 05 Steel Framing/05.07 - Tagging framing.mp4 26.0 MB
- 08 Steel Brace Frames/09.05 - Creating a brace frame sheet.mp4 24.5 MB
- 13 Project Management/13.02 - Keynoting.mp4 24.2 MB
- 10 Detailing and Annotating/10.06 - Adding Dimensions.mp4 23.8 MB
- 11 Schedules and Tagging/11.03 - Creating a Pier Tag.mp4 23.3 MB
- 05 Steel Framing/05.06 - Adding joist systems.mp4 22.9 MB
- 12 Trusses/12.01 - Adding Howe Trusses.mp4 22.4 MB
- 14 The Steel Tab/14.09 - Adding Modifiers.mp4 22.4 MB
- 05 Steel Framing/05.02 - Adding beam systems.mp4 22.3 MB
- 02 Setting Up the Project/02.04 - Adding and setting up structural views.mp4 22.2 MB
- 04 Foundations/04.11 - Retaining walls and footings.mp4 22.2 MB
- 03 Grids and Columns/03.02 - Adding steel columns to the model.mp4 22.1 MB
- 04 Foundations/04.05 - Creating a CMU elevator shaft.mp4 21.8 MB
- 05 Steel Framing/05.05 - Altering beam elevations.mp4 21.4 MB
- 14 The Steel Tab/14.01 - Configuring The Connection Settings.mp4 19.8 MB
- 06 Floors and Slabs/06.02 - Adding a concrete floor with steel decking.mp4 19.7 MB
- 06 Floors and Slabs/06.01 - Creating a slab on grade.mp4 19.3 MB
- 02 Setting Up the Project/02.01 - Linking architecture.mp4 18.9 MB
- 10 Detailing and Annotating/10.03 - Adding Cetail Components.mp4 18.6 MB
- 04 Foundations/04.03 - Adding piers and pilasters.mp4 18.6 MB
- 16 Structural Loading/16.01 - Configuring Symbolic Settings.mp4 18.4 MB
- 08 Steel Brace Frames/09.04 - Adding brace frame gussets.mp4 18.2 MB
- 14 The Steel Tab/14.04 - Adding a Column Support.mp4 18.0 MB
- 15 Precast Concrete/15.03 - Adding Reinforcing to a Precast Element.mp4 17.8 MB
- 11 Schedules and Tagging/11.02 - Pier Schedules.mp4 17.7 MB
- 14 The Steel Tab/14.10 - Adding a Miter.mp4 17.7 MB
- 14 The Steel Tab/14.02 - Adding a Base Plate.mp4 17.6 MB
- 05 Steel Framing/05.03 - Modifying beam systems.mp4 17.5 MB
- 04 Foundations/04.08 - Adding step footings.mp4 17.4 MB
- 14 The Steel Tab/14.05 - Customize a Connection.mp4 17.3 MB
- 14 The Steel Tab/14.03 - Adding a Clip Angle.mp4 16.9 MB
- 14 The Steel Tab/14.07 - Adding a Plate and Bolts.mp4 16.5 MB
- 04 Foundations/04.04 - Adding isolated footings.mp4 16.3 MB
- 15 Precast Concrete/15.02 - Splitting a Wall Into Precast Elements.mp4 16.0 MB
- 04 Foundations/04.10 - Adding a step footing family.mp4 15.9 MB
- 10 Detailing and Annotating/10.05 - Adding Text.mp4 15.6 MB
- 02 Setting Up the Project/02.05 - Creating view templates.mp4 15.3 MB
- 09 Stairs, Ramps, and Slopes/09.03 - Creating Ramps.mp4 15.3 MB
- 15 Precast Concrete/15.01 - Setting Up The Configurations.mp4 15.2 MB
- 06 Floors and Slabs/06.03 - Cantilevering slab edges.mp4 14.8 MB
- 07 Reinforcing/07.04 - Adding area reinforcing.mp4 14.5 MB
- 09 Stairs, Ramps, and Slopes/09.02 - Adding C Shapes to Stringers.mp4 14.5 MB
- 15 Precast Concrete/15.05 - Creating Precast Shop Drawings.mp4 14.4 MB
- 12 Trusses/12.04 - Editing The Truss Bottom Chord.mp4 14.3 MB
- 16 Structural Loading/16.07 - Adding Area Loads.mp4 14.2 MB
- 06 Floors and Slabs/06.05 - Creating slab depressions.mp4 14.2 MB
- 10 Detailing and Annotating/10.04 - Inserting AutoCAD Files.mp4 14.1 MB
- 04 Foundations/04.01 - Adding foundation walls.mp4 14.0 MB
- 10 Detailing and Annotating/10.01 - Sections and Callouts.mp4 14.0 MB
- 08 Steel Brace Frames/08.02 - Adding a brace frame.mp4 13.7 MB
- 12 Trusses/12.05 - Detailing Trusses.mp4 13.7 MB
- 12 Trusses/12.02 - Attaching Trusses to Roofs.mp4 13.5 MB
- 14 The Steel Tab/14.11 - Adding Parametric Cuts.mp4 13.4 MB
- 02 Setting Up the Project/02.03 - CopyMonitor.mp4 13.3 MB
- 12 Trusses/12.03 - Changing Truss Materials.mp4 13.2 MB
- 13 Project Management/13.04 - Plotting.mp4 13.2 MB
- 07 Reinforcing/07.01 - Parallel to face.mp4 13.1 MB
- 07 Reinforcing/07.03 - Sketching rebar.mp4 13.0 MB
- Project Files/Chapter-14/Syracuse Commons.rvt 12.9 MB
- 03 Grids and Columns/03.04 - Creating a column schedule.mp4 12.0 MB
- 06 Floors and Slabs/06.04 - Creating thickened slabs.mp4 11.4 MB
- 05 Steel Framing/05.04 - Copy and Paste Aligned.mp4 11.3 MB
- 07 Reinforcing/07.02 - Perpendicular to face.mp4 11.2 MB
- 16 Structural Loading/16.02 - Managing Materials.mp4 11.0 MB
- 10 Detailing and Annotating/10.02 - Coping.mp4 10.8 MB
- 04 Foundations/04.06 - Shaft openings.mp4 10.8 MB
- 14 The Steel Tab/14.06 - Breaking a Connection.mp4 10.6 MB
- 03 Grids and Columns/03.03 - Creating column offsets.mp4 10.5 MB
- 15 Precast Concrete/15.04 - Creating Precast Concrete Planks.mp4 10.4 MB
- Project Files/Chapter-9/Structural-47.rvt 9.6 MB
- Project Files/Chapter-9/Structural-48.rvt 9.6 MB
- Project Files/Chapter-9/Structural-46.rvt 9.6 MB
- 08 Steel Brace Frames/08.01 - Adding a brace frame elevation.mp4 9.6 MB
- 16 Structural Loading/16.05 - Creating Load Combinations.mp4 9.5 MB
- Project Files/Chapter-9/Structural-45.rvt 9.4 MB
- Project Files/Chapter-9/Structural-44.rvt 9.4 MB
- 16 Structural Loading/16.04 - Creating Load Cases.mp4 9.4 MB
- Project Files/Chapter-8/Structural-42.rvt 9.4 MB
- Project Files/Chapter-9/Structural-43.rvt 9.4 MB
- Project Files/Chapter-8/Structural-41.rvt 9.4 MB
- Project Files/Chapter-12/Structural_59.rvt 9.3 MB
- Project Files/Chapter-8/Structural-40.rvt 9.3 MB
- Project Files/Chapter-12/Structural_55.rvt 9.2 MB
- Project Files/Chapter-12/Structural_58.rvt 9.2 MB
- Project Files/Chapter-10/Structural_55.rvt 9.2 MB
- Project Files/Chapter-10/Structural_56.rvt 9.2 MB
- Project Files/Chapter-12/Structural_57.rvt 9.2 MB
- Project Files/Chapter-10/Structural_53.rvt 9.2 MB
- Project Files/Chapter-10/Structural_54.rvt 9.2 MB
- Project Files/Chapter-12/Structural_56.rvt 9.2 MB
- 04 Foundations/04.07 - Foundation slabs.mp4 9.2 MB
- Project Files/Chapter-8/Structural-39.rvt 9.1 MB
- Project Files/Chapter-7/Structural-36.rvt 9.1 MB
- Project Files/Chapter-7/Structural-38.rvt 9.1 MB
- Project Files/Chapter-6/Structural-33.rvt 9.1 MB
- Project Files/Chapter-7/Structural-34.rvt 9.1 MB
- Project Files/Chapter-7/Structural-35.rvt 9.1 MB
- Project Files/Chapter-7/Structural-37.rvt 9.1 MB
- Project Files/STRUCTURAL.rvt 9.1 MB
- Project Files/Chapter-5/Structural-27.rvt 9.0 MB
- Project Files/Chapter-6/Structural-30.rvt 9.0 MB
- Project Files/Chapter-6/Structural-32.rvt 9.0 MB
- Project Files/Chapter-6/Structural-29.rvt 9.0 MB
- Project Files/Chapter-6/Structural-31.rvt 9.0 MB
- Project Files/Chapter-5/Structural-25.rvt 9.0 MB
- Project Files/Chapter-5/Structural-28.rvt 9.0 MB
- Project Files/Chapter-5/Structural-26.rvt 9.0 MB
- Project Files/Chapter-4/Structural-23.rvt 8.9 MB
- Project Files/Chapter-5/Structural-24.rvt 8.8 MB
- 07 Reinforcing/07.05 - View settings.mp4 8.6 MB
- 04 Foundations/04.02 - Adding wall footings.mp4 8.2 MB
- Project Files/Chapter-4/Structural-22.rvt 7.6 MB
- Project Files/Chapter-4/Structural-21.rvt 7.5 MB
- 08 Steel Brace Frames/09.03 - Modifying plan view symbology.mp4 7.3 MB
- 04 Foundations/04.09 - Tagging a step footing.mp4 7.2 MB
- Project Files/Chapter-4/Structural-20.rvt 7.0 MB
- 01 Introduction/01.01 - Using Revit for structural engineering in metric.mp4 6.9 MB
- Project Files/Chapter-4/Structural-19.rvt 6.9 MB
- Project Files/Chapter-2/Structural-06.rvt 6.8 MB
- Project Files/Chapter-4/Structural-18.rvt 6.8 MB
- Project Files/Chapter-4/Structural-17.rvt 6.6 MB
- Project Files/Chapter-3/Structural-15.rvt 6.6 MB
- Project Files/Chapter-3/Structural-16.rvt 6.6 MB
- Project Files/Chapter-3/Structural-13.rvt 6.6 MB
- Project Files/Chapter-3/Structural-14.rvt 6.6 MB
- Project Files/Chapter-3/Structural-12.rvt 6.6 MB
- Project Files/Chapter-3/Structural-11.rvt 6.5 MB
- Project Files/Chapter-3/Structural-10.rvt 6.4 MB
- Project Files/Chapter-3/Structural-09.rvt 6.2 MB
- Project Files/Chapter-3/Structural-08.rvt 6.2 MB
- Project Files/Chapter-3/Structural-07.rvt 6.2 MB
- Project Files/Chapter-2/Structural-05.rvt 6.1 MB
- Project Files/Chapter-1/Structural-04.rvt 6.0 MB
- Project Files/Chapter-2/Structural-04.rvt 6.0 MB
- Project Files/Chapter-1/Structural-02.rvt 6.0 MB
- Project Files/Chapter-1/Structural-03.rvt 6.0 MB
- Project Files/Chapter-1/Structural-01.rvt 6.0 MB
- Project Files/Chapter-14/Architectural.rvt 5.6 MB
- Project Files/Architectural/Architectural.rvt 5.4 MB
- Project Files/Chapter-8/Sloped Slabs.rvt 5.4 MB
- Project Files/Chapter-3/Retaining Walls.rvt 5.2 MB
- Project Files/Chapter-3/Retaining Walls.0001.rvt 4.9 MB
- Project Files/Chapter-11/Trusses-05.rvt 4.8 MB
- Project Files/Chapter-11/Trusses-04.rvt 4.7 MB
- Project Files/Chapter-11/Trusses-03.rvt 4.6 MB
- Project Files/Chapter-11/Trusses-02.rvt 4.1 MB
- Project Files/Chapter-11/Trusses-01.rvt 3.9 MB
- Project Files/Chapter-11/Trusses.rvt 3.6 MB
- 17 Conclusion/17.01 - Next Steps.mp4 1.4 MB
- Project Files/Chapter-14/Hollow Core Slab.rfa 564.0 KB
- Project Files/Chapter-14/Round void.rfa 344.0 KB
- 09 Stairs, Ramps, and Slopes/09.04 - Sloping Slabs.mp4 81.9 KB
- Important.pdf 45.0 KB
- Project Files/Chapter-10/CAST IN PLACE CONCRETE.txt 24.8 KB
- Project Files/Chapter-9/Typical Perimeter Beam section.dwg 20.3 KB
- 13 Project Management/05 - File sharing.srt 12.9 KB
- 11 Schedules and Tagging/04 - Creating a material takeoff.srt 10.3 KB
- 11 Schedules and Tagging/01 - Footing schedules.srt 10.3 KB
- 03 Grids and Columns/01 - Adding grids to the model.srt 9.9 KB
- 09 Stairs, Ramps, and Slopes/01 - Creating stairs.srt 9.4 KB
- 14 The Steel Tab/08 - Adding welds and symbols.srt 9.0 KB
- 02 Setting Up the Project/02 - Creating levels.srt 8.7 KB
- 16 Structural Loading/03 - Configuring analytical settings.srt 8.4 KB
- 13 Project Management/01 - Phasing.srt 7.8 KB
- 11 Schedules and Tagging/03 - Creating a pier tag.srt 7.7 KB
- 02 Setting Up the Project/04 - Adding and setting up structural views.srt 7.7 KB
- 13 Project Management/03 - Revisions.srt 7.5 KB
- 02 Setting Up the Project/01 - Linking architecture.srt 7.4 KB
- 14 The Steel Tab/09 - Adding modifiers.srt 7.3 KB
- 13 Project Management/02 - Keynoting.srt 7.3 KB
- 10 Detailing and Annotating/03 - Adding detail components.srt 7.0 KB
- 08 Steel Brace Frames/05 - Creating a brace frame sheet.srt 6.5 KB
- 12 Trusses/01 - Adding Howe trusses.srt 6.3 KB
- 14 The Steel Tab/02 - Adding a base plate.srt 6.3 KB
- 05 Steel Framing/01 - Adding perimeter beams.srt 6.3 KB
- 14 The Steel Tab/01 - Configuring the connection settings.srt 6.2 KB
- 16 Structural Loading/01 - Configuring symbolic settings.srt 6.0 KB
- 10 Detailing and Annotating/06 - Adding dimensions.srt 5.9 KB
- 14 The Steel Tab/04 - Adding a column support.srt 5.5 KB
- 10 Detailing and Annotating/05 - Adding text.srt 5.4 KB
- 15 Precast Concrete/02 - Splitting a wall into precast elements.srt 5.4 KB
- 15 Precast Concrete/01 - Setting up the configurations.srt 5.4 KB
- 14 The Steel Tab/07 - Adding a plate and bolts.srt 5.3 KB
- 04 Foundations/05 - Creating a CMU elevator shaft.srt 5.3 KB
- 05 Steel Framing/02 - Adding beam systems.srt 5.2 KB
- 11 Schedules and Tagging/02 - Pier schedules.srt 5.2 KB
- 13 Project Management/04 - Plotting.srt 5.2 KB
- 04 Foundations/11 - Retaining walls and footings.srt 5.1 KB
- 10 Detailing and Annotating/01 - Sections and callouts.srt 5.0 KB
- 15 Precast Concrete/03 - Adding reinforcing to a precast element.srt 5.0 KB
- 08 Steel Brace Frames/04 - Adding brace frame gussets.srt 4.9 KB
- 05 Steel Framing/05 - Altering beam elevations.srt 4.9 KB
- 03 Grids and Columns/02 - Adding steel columns to the model.srt 4.9 KB
- 14 The Steel Tab/10 - Adding a miter.srt 4.9 KB
- 04 Foundations/08 - Adding step footings.srt 4.9 KB
- 05 Steel Framing/07 - Tagging framing.srt 4.8 KB
- 06 Floors and Slabs/02 - Adding a concrete floor with steel decking.srt 4.8 KB
- 10 Detailing and Annotating/04 - Inserting AutoCAD files.srt 4.8 KB
- 02 Setting Up the Project/05 - Creating view templates.srt 4.8 KB
- 04 Foundations/03 - Adding piers and pilasters.srt 4.7 KB
- 04 Foundations/10 - Adding a step footing family.srt 4.6 KB
- 06 Floors and Slabs/03 - Cantilevering slab edges.srt 4.6 KB
- 02 Setting Up the Project/03 - CopyMonitor.srt 4.5 KB
- 07 Reinforcing/01 - Parallel to face.srt 4.5 KB
- 12 Trusses/04 - Editing the truss bottom chord.srt 4.3 KB
- 14 The Steel Tab/11 - Adding parametric cuts.srt 4.2 KB
- 16 Structural Loading/06 - Configuring boundary conditions.srt 4.2 KB
- 08 Steel Brace Frames/02 - Adding a brace frame.srt 4.2 KB
- 03 Grids and Columns/04 - Creating a column schedule.srt 4.1 KB
- 05 Steel Framing/03 - Modifying beam systems.srt 4.1 KB
- 05 Steel Framing/06 - Adding joist systems.srt 4.1 KB
- 04 Foundations/01 - Adding foundation walls.srt 4.1 KB
- 14 The Steel Tab/05 - Customize a connection.srt 4.1 KB
- 15 Precast Concrete/05 - Creating precast shop drawings.srt 4.0 KB
- 06 Floors and Slabs/01 - Creating a slab on grade.srt 4.0 KB
- 12 Trusses/05 - Detailing trusses.srt 3.9 KB
- 14 The Steel Tab/03 - Adding a clip angle.srt 3.9 KB
- 16 Structural Loading/05 - Creating load combinations.srt 3.9 KB
- 07 Reinforcing/03 - Sketching rebar.srt 3.8 KB
- 09 Stairs, Ramps, and Slopes/03 - Creating ramps.srt 3.8 KB
- 10 Detailing and Annotating/02 - Coping.srt 3.8 KB
- 16 Structural Loading/08 - Adding line loads.srt 3.7 KB
- 04 Foundations/04 - Adding isolated footings.srt 3.7 KB
- 06 Floors and Slabs/05 - Creating slab depressions.srt 3.6 KB
- 03 Grids and Columns/03 - Creating column offsets.srt 3.4 KB
- 07 Reinforcing/02 - Perpendicular to face.srt 3.4 KB
- 16 Structural Loading/07 - Adding area loads.srt 3.3 KB
- 14 The Steel Tab/06 - Breaking a connection.srt 3.2 KB
- 12 Trusses/02 - Attaching trusses to roofs.srt 3.2 KB
- 16 Structural Loading/02 - Managing materials.srt 3.1 KB
- 07 Reinforcing/04 - Adding area reinforcing.srt 3.1 KB
- 12 Trusses/03 - Changing truss materials.srt 3.0 KB
- 08 Steel Brace Frames/01 - Adding a brace frame elevation.srt 3.0 KB
- 16 Structural Loading/04 - Creating load cases.srt 2.9 KB
- 07 Reinforcing/05 - View settings.srt 2.9 KB
- 06 Floors and Slabs/04 - Creating thickened slabs.srt 2.8 KB
- 04 Foundations/07 - Foundation slabs.srt 2.8 KB
- 04 Foundations/06 - Shaft openings.srt 2.8 KB
- 15 Precast Concrete/04 - Creating precast concrete planks.srt 2.7 KB
- 08 Steel Brace Frames/03 - Modifying plan view symbology.srt 2.6 KB
- 09 Stairs, Ramps, and Slopes/02 - Adding C shapes to stringers.srt 2.6 KB
- 04 Foundations/02 - Adding wall footings.srt 2.5 KB
- 04 Foundations/09 - Tagging a step footing.srt 2.2 KB
- 05 Steel Framing/04 - Copy and Paste Aligned.srt 1.9 KB
- 01 Introduction/01 - Using Revit for structural engineering in metric.srt 1.9 KB
- 17 Conclusion/01 - Next steps.srt 623 bytes
Download Torrent
Related Resources
Copyright Infringement
If the content above is not authorized, please contact us via anywarmservice[AT]gmail.com. Remember to include the full url in your complaint.