(2020) Revit 2021 - Essential Training for Structure (Imperial)-IVY
File List
- Ex_Files_Revit_2021_Structure_Imperial.zip 680.6 MB
- 04 - Steel Framing/01 - Adding perimeter beams.mp4 36.4 MB
- 08 - Stairs, Ramps, and Slopes/05 - Pitching floors to structure.mp4 35.1 MB
- 10 - Schedules and Tagging/01 - Footing schedules.mp4 34.2 MB
- 02 - Grids and Columns/01 - Adding grids to the model.mp4 33.5 MB
- 06 - Reinforcing/05 - View settings.mp4 31.0 MB
- 08 - Stairs, Ramps, and Slopes/01 - Creating stairs.mp4 28.5 MB
- 10 - Schedules and Tagging/04 - Creating a material takeoff.mp4 27.4 MB
- 03 - Foundations/05 - Creating a CMU elevator shaft.mp4 26.4 MB
- 04 - Steel Framing/06 - Adding joist systems.mp4 26.2 MB
- 12 - Project Management/01 - Phasing.mp4 23.8 MB
- 12 - Project Management/05 - File sharing.mp4 23.6 MB
- 01 - Setting Up the Project/02 - Creating levels.mp4 22.9 MB
- 13 - The Steel Tab/09 - Adding modifiers.mp4 21.6 MB
- 04 - Steel Framing/03 - Modifying beam systems.mp4 21.4 MB
- 12 - Project Management/03 - Revisions.mp4 20.9 MB
- 05 - Floors and Slabs/02 - Adding a concrete floor with steel decking.mp4 20.7 MB
- 09 - Detailing and Annotating/01 - Sections and callouts.mp4 20.4 MB
- 01 - Setting Up the Project/04 - Adding and setting up structural views.mp4 20.3 MB
- 06 - Reinforcing/06 - Adding freeform rebar.mp4 20.0 MB
- 12 - Project Management/02 - Keynoting.mp4 19.0 MB
- 10 - Schedules and Tagging/02 - Pier schedules.mp4 18.9 MB
- 01 - Setting Up the Project/05 - Creating view templates.mp4 18.8 MB
- 07 - Steel Brace Frames/05 - Creating a brace frame sheet.mp4 18.3 MB
- 07 - Steel Brace Frames/03 - Adding brace frame gussets.mp4 18.1 MB
- 06 - Reinforcing/01 - Parallel to face.mp4 17.9 MB
- 13 - The Steel Tab/08 - Adding welds and symbols.mp4 17.9 MB
- 03 - Foundations/10 - Retaining walls and footings.mp4 17.7 MB
- 10 - Schedules and Tagging/03 - Creating a pier tag.mp4 17.7 MB
- 04 - Steel Framing/07 - Tagging framing.mp4 17.7 MB
- 14 - Precast Concrete/04 - Creating precast concrete planks.mp4 17.4 MB
- 02 - Grids and Columns/05 - Adding slanted columns.mp4 17.1 MB
- 04 - Steel Framing/02 - Adding beam systems.mp4 16.9 MB
- 11 - Trusses/05 - Detailing trusses.mp4 16.8 MB
- 02 - Grids and Columns/02 - Adding steel columns to the model.mp4 16.7 MB
- 14 - Precast Concrete/05 - Creating precast shop drawings.mp4 15.9 MB
- 03 - Foundations/08 - Tagging a step footing.mp4 14.9 MB
- 13 - The Steel Tab/10 - Adding a miter.mp4 14.7 MB
- 03 - Foundations/07 - Adding step footings.mp4 14.6 MB
- 03 - Foundations/03 - Adding piers and pilasters.mp4 14.0 MB
- 01 - Setting Up the Project/01 - Linking architecture.mp4 13.9 MB
- 13 - The Steel Tab/04 - Adding a column support.mp4 13.9 MB
- 04 - Steel Framing/05 - Altering beam elevations.mp4 13.9 MB
- 14 - Precast Concrete/03 - Adding reinforcement to a precast element.mp4 13.8 MB
- 11 - Trusses/04 - Editing the truss bottom chord.mp4 13.2 MB
- 06 - Reinforcing/04 - Adding area reinforcing.mp4 13.0 MB
- 02 - Grids and Columns/06 - Attaching columns to steel.mp4 12.9 MB
- 14 - Precast Concrete/01 - Setting up the configurations.mp4 12.6 MB
- 02 - Grids and Columns/04 - Creating a column schedule.mp4 12.4 MB
- 08 - Stairs, Ramps, and Slopes/02 - Adding C shapes to stringers.mp4 12.4 MB
- 13 - The Steel Tab/03 - Adding a clip angle.mp4 12.2 MB
- 03 - Foundations/01 - Adding foundation walls.mp4 12.2 MB
- 13 - The Steel Tab/05 - Customize a connection.mp4 12.1 MB
- 13 - The Steel Tab/11 - Adding parametric cuts.mp4 12.0 MB
- 05 - Floors and Slabs/04 - Creating thickened slabs.mp4 11.9 MB
- 08 - Stairs, Ramps, and Slopes/03 - Creating ramps.mp4 11.7 MB
- 13 - The Steel Tab/07 - Adding a plate and bolts.mp4 11.5 MB
- 13 - The Steel Tab/02 - Adding a base plate.mp4 11.5 MB
- 11 - Trusses/01 - Adding Howe trusses.mp4 11.4 MB
- 09 - Detailing and Annotating/06 - Adding dimensions.mp4 11.3 MB
- 08 - Stairs, Ramps, and Slopes/04 - Sloping slabs.mp4 11.2 MB
- 06 - Reinforcing/02 - Perpendicular to face.mp4 11.1 MB
- 05 - Floors and Slabs/05 - Creating slab depressions.mp4 10.9 MB
- 01 - Setting Up the Project/03 - Copy-Monitor.mp4 10.9 MB
- 11 - Trusses/02 - Attaching trusses to roofs.mp4 10.8 MB
- 09 - Detailing and Annotating/03 - Adding detail components.mp4 10.7 MB
- 13 - The Steel Tab/01 - Configuring the connection settings.mp4 9.8 MB
- 06 - Reinforcing/03 - Sketching rebar.mp4 9.7 MB
- 03 - Foundations/09 - Adding a step footing family.mp4 9.7 MB
- 05 - Floors and Slabs/03 - Cantilevering slab edges.mp4 9.6 MB
- 07 - Steel Brace Frames/02 - Adding a brace frame.mp4 9.6 MB
- 03 - Foundations/06 - Shaft openings.mp4 9.5 MB
- 14 - Precast Concrete/02 - Splitting a wall into precast elements.mp4 9.3 MB
- 04 - Steel Framing/04 - Copy and Paste Aligned.mp4 9.3 MB
- 05 - Floors and Slabs/01 - Creating a slab on grade.mp4 8.7 MB
- 11 - Trusses/03 - Changing truss materials.mp4 8.6 MB
- 12 - Project Management/04 - Plotting.mp4 8.3 MB
- 07 - Steel Brace Frames/01 - Adding a brace frame elevation.mp4 8.0 MB
- 09 - Detailing and Annotating/02 - Coping.mp4 8.0 MB
- 13 - The Steel Tab/06 - Breaking a connection.mp4 7.9 MB
- 09 - Detailing and Annotating/05 - Adding text.mp4 7.8 MB
- 00 - Introduction/01 - Learning Revit 2021.mp4 7.1 MB
- 09 - Detailing and Annotating/04 - Inserting AutoCAD.mp4 7.1 MB
- 02 - Grids and Columns/03 - Creating column offsets.mp4 7.0 MB
- 04 - Steel Framing/08 - Configuring beam joins.mp4 6.9 MB
- 03 - Foundations/02 - Adding wall footings.mp4 6.2 MB
- 07 - Steel Brace Frames/04 - Modifying plan view symbology.mp4 5.7 MB
- 03 - Foundations/04 - Adding isolated footings.mp4 5.5 MB
- 15 - Conclusion/01 - Next steps.mp4 1.5 MB
- 10 - Schedules and Tagging/01 - Footing schedules.srt 13.0 KB
- 12 - Project Management/05 - File sharing.srt 12.8 KB
- 01 - Setting Up the Project/02 - Creating levels.srt 12.2 KB
- 06 - Reinforcing/05 - View settings.srt 10.6 KB
- 02 - Grids and Columns/01 - Adding grids to the model.srt 10.3 KB
- 10 - Schedules and Tagging/04 - Creating a material takeoff.srt 10.2 KB
- 08 - Stairs, Ramps, and Slopes/05 - Pitching floors to structure.srt 10.1 KB
- 03 - Foundations/05 - Creating a CMU elevator shaft.srt 10.1 KB
- 04 - Steel Framing/01 - Adding perimeter beams.srt 9.1 KB
- 01 - Setting Up the Project/04 - Adding and setting up structural views.srt 8.8 KB
- 08 - Stairs, Ramps, and Slopes/01 - Creating stairs.srt 8.5 KB
- 13 - The Steel Tab/09 - Adding modifiers.srt 8.2 KB
- 01 - Setting Up the Project/01 - Linking architecture.srt 8.1 KB
- 12 - Project Management/01 - Phasing.srt 7.8 KB
- 09 - Detailing and Annotating/01 - Sections and callouts.srt 7.6 KB
- 12 - Project Management/02 - Keynoting.srt 7.5 KB
- 01 - Setting Up the Project/05 - Creating view templates.srt 7.4 KB
- 04 - Steel Framing/03 - Modifying beam systems.srt 7.3 KB
- 06 - Reinforcing/01 - Parallel to face.srt 7.3 KB
- 14 - Precast Concrete/01 - Setting up the configurations.srt 7.2 KB
- 10 - Schedules and Tagging/03 - Creating a pier tag.srt 7.1 KB
- 13 - The Steel Tab/08 - Adding welds and symbols.srt 7.0 KB
- 12 - Project Management/03 - Revisions.srt 7.0 KB
- 06 - Reinforcing/06 - Adding freeform rebar.srt 6.9 KB
- 04 - Steel Framing/06 - Adding joist systems.srt 6.8 KB
- 07 - Steel Brace Frames/03 - Adding brace frame gussets.srt 6.8 KB
- 10 - Schedules and Tagging/02 - Pier schedules.srt 6.8 KB
- 14 - Precast Concrete/04 - Creating precast concrete planks.srt 6.5 KB
- 07 - Steel Brace Frames/05 - Creating a brace frame sheet.srt 6.4 KB
- 03 - Foundations/10 - Retaining walls and footings.srt 5.7 KB
- 03 - Foundations/08 - Tagging a step footing.srt 5.7 KB
- 11 - Trusses/05 - Detailing trusses.srt 5.7 KB
- 02 - Grids and Columns/05 - Adding slanted columns.srt 5.6 KB
- 13 - The Steel Tab/04 - Adding a column support.srt 5.6 KB
- 13 - The Steel Tab/07 - Adding a plate and bolts.srt 5.6 KB
- 05 - Floors and Slabs/02 - Adding a concrete floor with steel decking.srt 5.4 KB
- 04 - Steel Framing/07 - Tagging framing.srt 5.3 KB
- 13 - The Steel Tab/02 - Adding a base plate.srt 5.2 KB
- 05 - Floors and Slabs/04 - Creating thickened slabs.srt 5.2 KB
- 03 - Foundations/07 - Adding step footings.srt 5.1 KB
- 04 - Steel Framing/02 - Adding beam systems.srt 5.0 KB
- 14 - Precast Concrete/03 - Adding reinforcement to a precast element.srt 4.9 KB
- 02 - Grids and Columns/06 - Attaching columns to steel.srt 4.9 KB
- 04 - Steel Framing/05 - Altering beam elevations.srt 4.9 KB
- 02 - Grids and Columns/04 - Creating a column schedule.srt 4.8 KB
- 13 - The Steel Tab/03 - Adding a clip angle.srt 4.8 KB
- 02 - Grids and Columns/02 - Adding steel columns to the model.srt 4.7 KB
- 01 - Setting Up the Project/03 - Copy-Monitor.srt 4.7 KB
- 12 - Project Management/04 - Plotting.srt 4.7 KB
- 09 - Detailing and Annotating/03 - Adding detail components.srt 4.6 KB
- 13 - The Steel Tab/10 - Adding a miter.srt 4.5 KB
- 11 - Trusses/04 - Editing the truss bottom chord.srt 4.5 KB
- 03 - Foundations/03 - Adding piers and pilasters.srt 4.5 KB
- 06 - Reinforcing/02 - Perpendicular to face.srt 4.4 KB
- 13 - The Steel Tab/01 - Configuring the connection settings.srt 4.3 KB
- 07 - Steel Brace Frames/02 - Adding a brace frame.srt 4.2 KB
- 08 - Stairs, Ramps, and Slopes/03 - Creating ramps.srt 4.1 KB
- 06 - Reinforcing/03 - Sketching rebar.srt 4.1 KB
- 06 - Reinforcing/04 - Adding area reinforcing.srt 4.1 KB
- 05 - Floors and Slabs/05 - Creating slab depressions.srt 4.1 KB
- 11 - Trusses/01 - Adding Howe trusses.srt 4.0 KB
- 14 - Precast Concrete/05 - Creating precast shop drawings.srt 4.0 KB
- 03 - Foundations/06 - Shaft openings.srt 3.9 KB
- 09 - Detailing and Annotating/02 - Coping.srt 3.9 KB
- 05 - Floors and Slabs/03 - Cantilevering slab edges.srt 3.9 KB
- 03 - Foundations/09 - Adding a step footing family.srt 3.8 KB
- 11 - Trusses/02 - Attaching trusses to roofs.srt 3.7 KB
- 09 - Detailing and Annotating/04 - Inserting AutoCAD.srt 3.7 KB
- 03 - Foundations/01 - Adding foundation walls.srt 3.7 KB
- 14 - Precast Concrete/02 - Splitting a wall into precast elements.srt 3.6 KB
- 13 - The Steel Tab/11 - Adding parametric cuts.srt 3.5 KB
- 07 - Steel Brace Frames/01 - Adding a brace frame elevation.srt 3.5 KB
- 08 - Stairs, Ramps, and Slopes/04 - Sloping slabs.srt 3.5 KB
- 08 - Stairs, Ramps, and Slopes/02 - Adding C shapes to stringers.srt 3.4 KB
- 13 - The Steel Tab/05 - Customize a connection.srt 3.2 KB
- 02 - Grids and Columns/03 - Creating column offsets.srt 3.2 KB
- 09 - Detailing and Annotating/05 - Adding text.srt 3.2 KB
- 09 - Detailing and Annotating/06 - Adding dimensions.srt 3.0 KB
- 07 - Steel Brace Frames/04 - Modifying plan view symbology.srt 2.8 KB
- 05 - Floors and Slabs/01 - Creating a slab on grade.srt 2.8 KB
- 04 - Steel Framing/04 - Copy and Paste Aligned.srt 2.6 KB
- 11 - Trusses/03 - Changing truss materials.srt 2.4 KB
- 13 - The Steel Tab/06 - Breaking a connection.srt 2.4 KB
- 03 - Foundations/02 - Adding wall footings.srt 2.2 KB
- 03 - Foundations/04 - Adding isolated footings.srt 2.1 KB
- 04 - Steel Framing/08 - Configuring beam joins.srt 2.1 KB
- 00 - Introduction/01 - Learning Revit 2021.srt 2.0 KB
- 15 - Conclusion/01 - Next steps.srt 948 bytes
Download Torrent
Related Resources
Copyright Infringement
If the content above is not authorized, please contact us via anywarmservice[AT]gmail.com. Remember to include the full url in your complaint.