free-course-site.com.-udemy.-.-mastering.-microcontroller.with.-embedded.-driver.-development

Creation Time	Nov. 24, 2023, 3:40 a.m.
Last Access Time	Nov. 18, 2024, 12:37 a.m.
File Size	3.4 GB
Keywords	free-course-site -development -microcontroller -driver with -mastering - -udemy -embedded com
Total Requests	20
Total Files	623
Magnet Link	Please wait ...
	Download (Magnet Link) Play (Watch Online)

13. Understanding MCU Specific Header file/1. Understanding MCU Specific header file Part 1.mp4 79.7 MB
3. Eclipse Setup For ARM Cortex M based MCUs/13. Integrating MCU Peripheral Library( Device HAL) Contd.mp4 64.6 MB
13. Understanding MCU Specific Header file/2. Understanding MCU Specific header file Part 2.mp4 62.9 MB
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/4. KEIL-MDK-5 Pack Installation.mp4 59.7 MB
5. LEDButton Exercises using BSPs/1. Exercise LED Toggling App using Board BSP APIs.mp4 57.6 MB
11. Understanding MCU Vector table/1. Understanding MCU Vector Table Part-1.mp4 56.9 MB
3. Eclipse Setup For ARM Cortex M based MCUs/15. Download & Debugging Code using GDB and OpenOCD contd..mp4 56.1 MB
6. Embedded Code Debugging Tools n Tips/7. Embedded Code Debugging Part-7 Memory Windows.mp4 51.2 MB
10. Understanding MCU Peripheral Clock Control/2. Exercise EnablingDisabling Peripheral Clock.mp4 48.8 MB
2. Development board used in our courses/3. STM32F4 Discovery and Nucleo Board Details.mp4 44.0 MB
9. Understanding MCU Clocks and Details/3. Exercise-Using HSI Clock and Clock MeasurementPart 1.mp4 43.3 MB
8. MCU Bus Interfaces/1. MCU Bus Interfaces Explanation Part 1 I-CodeD-CodeS-Bus.mp4 43.2 MB
12. Understanding MCU interrupt Design , NVIC, Interrupt handling/2. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 2.mp4 42.7 MB
8. MCU Bus Interfaces/2. MCU Bus Interfaces Explanation Part 2 AHBAPB1APB2.mp4 42.7 MB
3. Eclipse Setup For ARM Cortex M based MCUs/8. Eclipse Project Creation for ARM Cortex Proc. Based MCU.mp4 39.5 MB
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/6. Creating a KEIL Project.mp4 38.9 MB
8. MCU Bus Interfaces/3. MCU Bus Interfaces Explanation Part 3 QA session.mp4 38.6 MB
3. Eclipse Setup For ARM Cortex M based MCUs/9. Understanding Eclipse Project Directory structure..mp4 37.9 MB
3. Eclipse Setup For ARM Cortex M based MCUs/14. Download & Debugging Code using GDB and OpenOCD.mp4 37.7 MB
7. Understanding MCU Memory Map/3. Understanding Memory Map of the MCU Part 3.mp4 36.8 MB
9. Understanding MCU Clocks and Details/2. Understanding MCU Clocking System Part2.mp4 36.7 MB
12. Understanding MCU interrupt Design , NVIC, Interrupt handling/1. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 1.mp4 36.2 MB
6. Embedded Code Debugging Tools n Tips/8. Exercise-Copying data from Flash to RAM.mp4 31.5 MB
16. GPIO Driver Development Getting started/3. Creating Driver Template Project Eclipse.mp4 29.5 MB
34. Writing SPI sample application Master Code/1. Initialization.mp4 29.1 MB
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/2. KEIL-MDK-5 Installation.mp4 29.0 MB
10. Understanding MCU Peripheral Clock Control/3. Exercise-Making HSE as System Clock.mp4 27.9 MB
3. Eclipse Setup For ARM Cortex M based MCUs/12. Integrating MCU Peripheral Library( Device HAL).mp4 26.1 MB
44. I2C MasterSlave Communication/2. How I2C Master RX data .mp4 25.4 MB
69. MCU Clocks Configurations and Measurements/3. Measuring HSE,HSI, PLL and System Clock(Routing Clocks to GPIOs).mp4 24.8 MB
6. Embedded Code Debugging Tools n Tips/5. Embedded Code Debugging Part-5 Call Stack Usage.mp4 24.6 MB
53. Writing I2C sample Application Master Code/1. I2C Initialization.mp4 24.1 MB
69. MCU Clocks Configurations and Measurements/1. Exploring System , AHB, APB clocks of the MCU.mp4 24.1 MB
3. Eclipse Setup For ARM Cortex M based MCUs/5. Installing GNU ARM Eclipse Plugins.mp4 24.0 MB
5. LEDButton Exercises using BSPs/3. Exercise Adding button support using board BSP APIs(Nucleo).mp4 23.2 MB
2. Development board used in our courses/2. About MCU Development board.mp4 20.5 MB
12. Understanding MCU interrupt Design , NVIC, Interrupt handling/4. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 4.mp4 20.3 MB
54. Testing and Protocol Decoding using logic analyzer (lets get the trace )/2. Decoding and Analyzing I2C transaction using logic analyzer.mp4 20.0 MB
10. Understanding MCU Peripheral Clock Control/4. Exercise-Making HSE as System Clock Contd..mp4 20.0 MB
17. GPIO Driver Development Driver header file/1. Implementing Driver Header file.mp4 19.8 MB
54. Testing and Protocol Decoding using logic analyzer (lets get the trace )/1. Initial testing on hardware.mp4 19.8 MB
21. GPIO Interrupt Handling/1. Exploring How peripherals interrupts the processor via NVIC.mp4 19.7 MB
1. Overview of the Course/1. What is this course all about .mp4 19.2 MB
7. Understanding MCU Memory Map/1. Understanding Memory Map of the MCU Part 1.mp4 18.5 MB
12. Understanding MCU interrupt Design , NVIC, Interrupt handling/3. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 3.mp4 18.5 MB
5. LEDButton Exercises using BSPs/2. Exercise LED Toggling App using Board BSP APIs-Nucleo.mp4 18.3 MB
27. SPI Driver Development Writing Driver header file/2. SPI Data structures.mp4 18.0 MB
11. Understanding MCU Vector table/2. Understanding MCU Vector Table Part-2.mp4 17.6 MB
8. MCU Bus Interfaces/4. Understanding MCU Bus Matrix.mp4 17.5 MB
3. Eclipse Setup For ARM Cortex M based MCUs/10. Understanding CMSIS.mp4 17.4 MB
64. UART Driver Development Interrupt Handling/1. Implementing UART IRQ Handler.mp4 17.2 MB
43. I2C Peripheral Registers/1. Exploring I2C Control Registers(CR).mp4 17.1 MB
22. SPI Essentials (All about SPI)/2. Understanding SPI protocol.mp4 17.1 MB
30. SPI MasterSlave Communication/1. How does SPI master TXRX data .mp4 17.0 MB
69. MCU Clocks Configurations and Measurements/4. Clocking MCU by Internal PLL (Running MCU at Full Speed).mp4 16.7 MB
36. Testing , Decoding and Debugging Tips/1. Initial testing on hardware.mp4 16.6 MB
10. Understanding MCU Peripheral Clock Control/1. Understanding MCU Peripheral Clock control.mp4 16.4 MB
46. I2C Driver Development Driver header file/2. I2C Data structures.mp4 16.2 MB
6. Embedded Code Debugging Tools n Tips/1. Embedded Code Debugging Part-1.mp4 15.9 MB
3. Eclipse Setup For ARM Cortex M based MCUs/4. Download Cross-Toolchain for ARM Cortex Processor.mp4 15.3 MB
7. Understanding MCU Memory Map/2. Understanding Memory Map of the MCU Part 2.mp4 15.1 MB
3. Eclipse Setup For ARM Cortex M based MCUs/3. Download Eclipse for CC++ Developers.mp4 14.7 MB
21. GPIO Interrupt Handling/5. Implementing APIs to Configure and Enable External Interrupts.mp4 14.5 MB
25. SPI Important Registers/1. Exploring SPI Control Registers(CR).mp4 14.2 MB
62. UART Driver Development Writing init Function/3. Configuring Baudrate, oversampling and Interrupts.mp4 14.1 MB
6. Embedded Code Debugging Tools n Tips/3. Embedded Code Debugging Part-3 Step InStep OverStep Out.mp4 14.0 MB
9. Understanding MCU Clocks and Details/1. Understanding MCU Clocking SystemPart1.mp4 13.8 MB
31. SPI Driver Development Implementing TX ISR/1. Understanding SPI TXRX IRQ numbers.mp4 13.7 MB
3. Eclipse Setup For ARM Cortex M based MCUs/11. Downloading CMSIS.mp4 13.6 MB
2. Development board used in our courses/5. ST Link Firmware Upgrade.mp4 13.6 MB
21. GPIO Interrupt Handling/2. GPIO irq numbers.mp4 13.5 MB
9. Understanding MCU Clocks and Details/4. Exercise-Using HSI Clock and Clock Measurement Part 2.mp4 13.4 MB
3. Eclipse Setup For ARM Cortex M based MCUs/7. Download and Install OpenOCD.mp4 13.1 MB
59. UART Registers/4. UART Baudrate Calculation.mp4 13.0 MB
24. SPI Functional Block and Clock/2. SPI Peripheral clock and Serial clock.mp4 12.8 MB
2. Development board used in our courses/4. ST-Link Driver Installation.mp4 12.8 MB
68. Creating printf library for your board/3. Creating static library in KEIL and testing.mp4 12.7 MB
37. I2C Essentials/1. Intro to I2C protocol.mp4 12.5 MB
41. I2C Functional block diagram and Clocks/2. I2C peripheral clock and serial line clock(Fpclk and SCL).mp4 12.5 MB
59. UART Registers/1. Exploring UART Control Registers.mp4 12.4 MB
68. Creating printf library for your board/2. Implementing UART print apis.mp4 12.4 MB
42. I2C Interrupts/1. I2C IRQs and Interrupt Mapping.mp4 12.4 MB
35. Writing SPI sample application Slave Code Implementation/2. Slave Handling ReadWrite command from master.mp4 12.4 MB
39. I2C Operating Modes/2. I2C duty cycle.mp4 11.5 MB
23. What is phase , polarity and SPI modes/1. Significance of Polarity and Phase.mp4 11.4 MB
14. GPIO Must know concepts/5. GPIO output mode with open drain state.mp4 11.4 MB
36. Testing , Decoding and Debugging Tips/4. Common problems in SPI and Debugging Tips.mp4 11.2 MB
61. UART Driver Development Driver Header File/2. Data Structures used and Driver exposed APIs.mp4 11.1 MB
62. UART Driver Development Writing init Function/1. Writing inti function and helper functions.mp4 11.1 MB
44. I2C MasterSlave Communication/1. How I2C Master TX data .mp4 10.9 MB
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/3. KEIL-MDK-5 Installation Contd..mp4 10.9 MB
28. SPI Driver Development Implementing init API/4. Configuring NSS(Slave select pin ).mp4 10.8 MB
6. Embedded Code Debugging Tools n Tips/6. Embedded Code Debugging Part-6 Watch Windows.mp4 10.8 MB
36. Testing , Decoding and Debugging Tips/2. Capture SPI transcation on Logic analyzer.mp4 10.7 MB
34. Writing SPI sample application Master Code/3. Master write Sequences (send CMD, get ACK, send data).mp4 10.7 MB
46. I2C Driver Development Driver header file/1. I2C Register Bit Definitions Macros.mp4 10.6 MB
66. UART sample application Implementation/1. UART Initializations and Txing.mp4 10.5 MB
38. I2C protocol in Detail/7. Repeated start (start with out a stop ).mp4 10.5 MB
57. UART Communication/2. Uart Receiver.mp4 10.1 MB
3. Eclipse Setup For ARM Cortex M based MCUs/6. Installing Windows Build Tools(only for Windows users).mp4 10.0 MB
16. GPIO Driver Development Getting started/4. Creating Driver Template Project KEIL.mp4 9.9 MB
8. MCU Bus Interfaces/4.1 Using the STM32F2 and STM32F4 DMA controller.pdf_jp2.zip 9.9 MB
43. I2C Peripheral Registers/4. Exploring I2C Status Registers(SR).mp4 9.9 MB
69. MCU Clocks Configurations and Measurements/2. Clocking MCU by using External Crystal Oscillator(HSE).mp4 9.7 MB
5. LEDButton Exercises using BSPs/1.1 User_manual_STM32f407_Disc_kit.pdf_jp2.zip 9.6 MB
24. SPI Functional Block and Clock/1. Exploring SPI functional block(How SPI Engine works in MCU ).mp4 9.6 MB
59. UART Registers/3. Exploring UART Status Registers.mp4 9.4 MB
15. GPIO Programming structure and Registers/10. GPIO alternate function register(used to set alternate functionality for a pin ).mp4 9.4 MB
20. GPIO driver Code testingWriting Sample APP/1. Write init function to configure LED.mp4 9.3 MB
27. SPI Driver Development Writing Driver header file/1. SPI Register Bit Definitions Macros(Converting register details in to Macros).mp4 9.2 MB
27. SPI Driver Development Writing Driver header file/3. Driver exposed APIs to handle SPI.mp4 9.0 MB
18. GPIO Driver Development Implementing Init API/1. Code to configure the mode.mp4 8.9 MB
48. I2C Driver Developemnt Writing TXRX API/1. Implementing TX API for MASTER.mp4 8.9 MB
30. SPI MasterSlave Communication/2. How does SPI slave TXRX data .mp4 8.8 MB
38. I2C protocol in Detail/8. Clock Stretching.mp4 8.7 MB
29. SPI Driver Development Implementing TXRX API/1. Implementing TX API for master.mp4 8.7 MB
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/5. Locating Pack Installation files.mp4 8.7 MB
64. UART Driver Development Interrupt Handling/4. Handling RXNE Interrupt.mp4 8.3 MB
21. GPIO Interrupt Handling/7. Test interrupt APIs we developed by using button.mp4 8.2 MB
15. GPIO Programming structure and Registers/1. GPIO programming structure.mp4 8.1 MB
56. UART functional block and Peripheral Clock/1. Exploring UART functional block.mp4 8.1 MB
6. Embedded Code Debugging Tools n Tips/4. Embedded Code Debugging Part-4 DisableKill all Bkpts..mp4 8.1 MB
23. What is phase , polarity and SPI modes/3. Uni-Directional and Bi-Directional SPI.mp4 8.1 MB
36. Testing , Decoding and Debugging Tips/3. Decoding SPI transcation Using logic analyzer.mp4 8.1 MB
58. UART Interrupts/1. Exploring UART Interrupt Mapping.mp4 8.0 MB
15. GPIO Programming structure and Registers/9. Enabling and disabling GPIO peripheral clock.mp4 8.0 MB
15. GPIO Programming structure and Registers/3. GPIO Mode register(used to set mode for a pin).mp4 8.0 MB
55. UART Essentials/6. UART Parity.mp4 7.8 MB
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/7. Understaning The Discovery Board.mp4 7.8 MB
23. What is phase , polarity and SPI modes/2. Different SPI Modes with Timing diagram.mp4 7.8 MB
15. GPIO Programming structure and Registers/5. GPIO port output speed register (how quick transition).mp4 7.4 MB
34. Writing SPI sample application Master Code/2. Defining various IRQ handlers.mp4 7.3 MB
56. UART functional block and Peripheral Clock/2. UART peripheral clock.mp4 7.2 MB
57. UART Communication/1. UART Transmitter.mp4 7.2 MB
51. I2C Error Interrupt Handling/2. Handling of Different I2C Errors.mp4 7.0 MB
55. UART Essentials/1. Intro UART vs USART.mp4 7.0 MB
54. Testing and Protocol Decoding using logic analyzer (lets get the trace )/3. Common Problems in I2C and Debugging Tips.mp4 7.0 MB
64. UART Driver Development Interrupt Handling/3. Handling of TX Complete Interrupt.mp4 7.0 MB
14. GPIO Must know concepts/7. Optimizing IO power consumption.mp4 6.9 MB
31. SPI Driver Development Implementing TX ISR/4. Handling spi Tx interrupt.mp4 6.8 MB
29. SPI Driver Development Implementing TXRX API/3. Implementing TX API for slave.mp4 6.7 MB
53. Writing I2C sample Application Master Code/3. Implementing master write Sequences(cmd,length,data).mp4 6.7 MB
51. I2C Error Interrupt Handling/1. Writing Error interrupt handler.mp4 6.7 MB
21. GPIO Interrupt Handling/3. Vector table and IRQ handlers.mp4 6.6 MB
47. I2C Driver Development Init Function/5. Code to Initialize I2C Serial Clock.mp4 6.6 MB
18. GPIO Driver Development Implementing Init API/4. Configuring alternate function.mp4 6.5 MB
46. I2C Driver Development Driver header file/3. I2C Driver Exposed APIs.mp4 6.4 MB
63. UART Driver Development Writing TXRX function/1. Writing TX function.mp4 6.4 MB
20. GPIO driver Code testingWriting Sample APP/4. Testing LED behaviour on logic analyser software.mp4 6.3 MB
41. I2C Functional block diagram and Clocks/1. Exploring I2C functional block in the MCU.mp4 6.3 MB
31. SPI Driver Development Implementing TX ISR/3. Writing SPI irq handler.mp4 6.2 MB
67. Running and Testing/1. Testing on hardware.mp4 6.2 MB
53. Writing I2C sample Application Master Code/5. Slave Handling ReadWrite Command from master.mp4 6.0 MB
14. GPIO Must know concepts/2. GPIO behind the scene.mp4 5.9 MB
42. I2C Interrupts/2. Exploring I2C IRQ numbers.mp4 5.9 MB
43. I2C Peripheral Registers/5. Exploring I2C Clock Control Register(CCR).mp4 5.9 MB
38. I2C protocol in Detail/6. Master ReadWrite Data Phase.mp4 5.9 MB
48. I2C Driver Developemnt Writing TXRX API/2. Implementing RX API for MASTER.mp4 5.8 MB
53. Writing I2C sample Application Master Code/2. Implementing I2C IRQ Handlers.mp4 5.8 MB
66. UART sample application Implementation/2. Receiving commands from PC.mp4 5.8 MB
14. GPIO Must know concepts/6. GPIO output mode with push pull state.mp4 5.7 MB
33. Writing SPI sample application Getting Started/1. Understanding the Requirements.mp4 5.7 MB
55. UART Essentials/2. Understanding UART pins.mp4 5.7 MB
47. I2C Driver Development Init Function/8. Other Helper Functions.mp4 5.5 MB
6. Embedded Code Debugging Tools n Tips/2. Embedded Code Debugging Part-2 Break points.mp4 5.4 MB
14. GPIO Must know concepts/1. GPIO pin and GPIO port.mp4 5.4 MB
37. I2C Essentials/2. I2C Hardware Setup.mp4 5.3 MB
29. SPI Driver Development Implementing TXRX API/2. Implementing RX API for master.mp4 5.3 MB
38. I2C protocol in Detail/1. Basics.mp4 5.3 MB
5. LEDButton Exercises using BSPs/2.1 STM32 Nucleo (64 pins) schematics.pdf_jp2.zip 5.3 MB
21. GPIO Interrupt Handling/4. Adding interrupt handling apis to our driver.mp4 5.3 MB
55. UART Essentials/4. Baud Rate.mp4 5.1 MB
47. I2C Driver Development Init Function/4. Configure I2C mode, addressing mode and duty cycle.mp4 5.1 MB
53. Writing I2C sample Application Master Code/4. Implementing master read Sequences(cmd,length,data).mp4 5.1 MB
63. UART Driver Development Writing TXRX function/2. Writing RX Function.mp4 5.0 MB
65. UART sample application Getting ready/2. Understanding connection diagram.mp4 5.0 MB
22. SPI Essentials (All about SPI)/3. SPI behind the scene.mp4 5.0 MB
65. UART sample application Getting ready/3. Exploring uart sniffer software for pc.mp4 5.0 MB
28. SPI Driver Development Implementing init API/1. Writing init function and helper functions.mp4 4.9 MB
50. I2C Event Interrupt handling for slave/3. Handling of TXE event Interrupt.mp4 4.9 MB
59. UART Registers/2. Exploring UART Data Registers.mp4 4.9 MB
34. Writing SPI sample application Master Code/4. Master Receive Sequences(Send CMD, get ACK, get data).mp4 4.8 MB
52. Writing I2C sample application Getting ready/1. Understanding the Requirements.mp4 4.8 MB
33. Writing SPI sample application Getting Started/2. Understanding connection diagram.mp4 4.7 MB
15. GPIO Programming structure and Registers/6. GPIO port pull-uppull-down register(used to activatedeactivate pull-ups).mp4 4.7 MB
43. I2C Peripheral Registers/3. Exploring I2C Data Register(DR).mp4 4.5 MB
64. UART Driver Development Interrupt Handling/2. Handling TXE interrupt.mp4 4.4 MB
47. I2C Driver Development Init Function/3. Configure clock stretching , own address , auto ACKing.mp4 4.4 MB
25. SPI Important Registers/2. Exploring SPI Data Registers(DR).mp4 4.4 MB
55. UART Essentials/3. UART frame formats.mp4 4.3 MB
61. UART Driver Development Driver Header File/1. UART Register Bit Definitions Macros.mp4 4.2 MB
49. I2C Event Interrupt handling for master/1. Implementing event interrupt handler.mp4 4.1 MB
50. I2C Event Interrupt handling for slave/2. Handling of STOP detection event Interrupt.mp4 4.1 MB
55. UART Essentials/5. Synchronization bits.mp4 4.1 MB
50. I2C Event Interrupt handling for slave/5. Handling of RXNE and BTF event interrupt.mp4 4.0 MB
47. I2C Driver Development Init Function/7. EnablingDisabling Buff, Event, and Error interrupts.mp4 4.0 MB
49. I2C Event Interrupt handling for master/3. Handling of TX BTF event for master.mp4 4.0 MB
20. GPIO driver Code testingWriting Sample APP/2. Code implementation to turn onofftoggle LED.mp4 3.9 MB
39. I2C Operating Modes/1. I2C in fast mode and standard mode.mp4 3.9 MB
18. GPIO Driver Development Implementing Init API/2. Code to configure GPIO speed and output type.mp4 3.9 MB
16. GPIO Driver Development Getting started/1. Overview of the driver development task.mp4 3.8 MB
28. SPI Driver Development Implementing init API/2. Configuring mode, phase and polarity.mp4 3.8 MB
65. UART sample application Getting ready/1. Understanding the Requirements.mp4 3.8 MB
44. I2C MasterSlave Communication/3. How I2C Slave TX data .mp4 3.7 MB
62. UART Driver Development Writing init Function/2. Configuring Word length, Stop Bits.mp4 3.7 MB
19. GPIO Driver Development Implementing ReadWrite APIs/1. Implementing GPIO Read API.mp4 3.6 MB
48. I2C Driver Developemnt Writing TXRX API/3. Implementing TX API for SLAVE.mp4 3.6 MB
26. SPI Driver Development Getting started/1. Overview.mp4 3.5 MB
32. SPI Driver Development Implementing RX ISR/1. Handling RX done interrupt in ISR.mp4 3.5 MB
28. SPI Driver Development Implementing init API/3. Configuring datasize, baudrate and direction.mp4 3.5 MB
22. SPI Essentials (All about SPI)/1. Introduction to SPI.mp4 3.5 MB
40. I2C Addressing mode/1. 7bit addressing.mp4 3.4 MB
16. GPIO Driver Development Getting started/2. Driver API Requirements.mp4 3.4 MB
25. SPI Important Registers/3. Exploring SPI Status Registers(SR).mp4 3.4 MB
60. UART Driver Development Getting Started/3. Exploring Different UART Peripherals and pins of the MCU.mp4 3.3 MB
31. SPI Driver Development Implementing TX ISR/2. Setting up TXERXNE interrupt.mp4 3.3 MB
28. SPI Driver Development Implementing init API/5. EnablingDisabling SPI Peripheral.mp4 3.3 MB
50. I2C Event Interrupt handling for slave/1. Handling of slave Address Match Event.mp4 3.2 MB
40. I2C Addressing mode/2. 10 bit addressing.mp4 3.2 MB
45. I2C Driver Development Getting started/1. Overview.mp4 3.1 MB
38. I2C protocol in Detail/4. ACKNACK.mp4 3.1 MB
15. GPIO Programming structure and Registers/4. GPIO port output type register(used to specify op type).mp4 2.9 MB
21. GPIO Interrupt Handling/6. Clearing external interrupt (otherwise NVIC will keep getting kicked ).mp4 2.9 MB
47. I2C Driver Development Init Function/1. Init API and Helper Functions.mp4 2.9 MB
14. GPIO Must know concepts/3. GPIO input mode with high impedance state.mp4 2.9 MB
18. GPIO Driver Development Implementing Init API/3. Code to configure GPIO pull-uppull down.mp4 2.9 MB
45. I2C Driver Development Getting started/3. Exploring different I2C Peripherals and pins of the MCU.mp4 2.8 MB
47. I2C Driver Development Init Function/6. Code to Generate StartStop condition.mp4 2.8 MB
38. I2C protocol in Detail/2. Address phase.mp4 2.8 MB
14. GPIO Must know concepts/4. GPIO input mode with pull-updown state.mp4 2.8 MB
15. GPIO Programming structure and Registers/8. GPIO port output data register(used to write to pin).mp4 2.7 MB
20. GPIO driver Code testingWriting Sample APP/3. Testing the sample Application on development board.mp4 2.7 MB
29. SPI Driver Development Implementing TXRX API/4. Implementing RX API for slave.mp4 2.7 MB
48. I2C Driver Developemnt Writing TXRX API/4. Implementing RX API for SLAVE.mp4 2.6 MB
35. Writing SPI sample application Slave Code Implementation/1. Initialization.mp4 2.6 MB
15. GPIO Programming structure and Registers/7. GPIO port input data register (used to read from pin).mp4 2.6 MB
26. SPI Driver Development Getting started/2. Driver API Requirements.mp4 2.5 MB
15. GPIO Programming structure and Registers/2. Exploring GPIO PORT and pins of STM32F4xx Discovery board.mp4 2.5 MB
19. GPIO Driver Development Implementing ReadWrite APIs/2. Implementing GPIO Write API.mp4 2.5 MB
43. I2C Peripheral Registers/2. Exploring I2C Own Address Registers(OAR).mp4 2.5 MB
60. UART Driver Development Getting Started/1. Overview.mp4 2.5 MB
38. I2C protocol in Detail/3. Start Condition.mp4 2.4 MB
49. I2C Event Interrupt handling for master/2. Handling of TXE event for master.mp4 2.4 MB
26. SPI Driver Development Getting started/3. Exploring different SPI Peripherals and pin packs of the MCU.mp4 2.4 MB
68. Creating printf library for your board/1. Introduction.mp4 2.2 MB
50. I2C Event Interrupt handling for slave/4. Handling of TX BTF event Interrupt.mp4 2.2 MB
38. I2C protocol in Detail/5. Stop Condition.mp4 2.0 MB
.____padding_file/267 2.0 MB
.____padding_file/271 2.0 MB
.____padding_file/273 2.0 MB
.____padding_file/268 2.0 MB
.____padding_file/5 2.0 MB
.____padding_file/3 2.0 MB
.____padding_file/122 2.0 MB
.____padding_file/163 2.0 MB
.____padding_file/89 2.0 MB
.____padding_file/90 2.0 MB
.____padding_file/292 2.0 MB
.____padding_file/119 2.0 MB
.____padding_file/190 2.0 MB
.____padding_file/299 2.0 MB
.____padding_file/300 2.0 MB
.____padding_file/178 2.0 MB
.____padding_file/142 2.0 MB
.____padding_file/310 2.0 MB
.____padding_file/206 2.0 MB
.____padding_file/265 2.0 MB
.____padding_file/80 2.0 MB
.____padding_file/199 2.0 MB
.____padding_file/25 2.0 MB
.____padding_file/19 2.0 MB
.____padding_file/12 2.0 MB
.____padding_file/312 2.0 MB
.____padding_file/22 2.0 MB
.____padding_file/4 2.0 MB
.____padding_file/2 2.0 MB
.____padding_file/213 2.0 MB
.____padding_file/258 2.0 MB
.____padding_file/81 2.0 MB
.____padding_file/311 2.0 MB
.____padding_file/210 2.0 MB
.____padding_file/59 2.0 MB
.____padding_file/284 2.0 MB
.____padding_file/313 2.0 MB
.____padding_file/207 2.0 MB
.____padding_file/255 2.0 MB
.____padding_file/251 2.0 MB
.____padding_file/23 2.0 MB
.____padding_file/42 2.0 MB
.____padding_file/7 2.0 MB
.____padding_file/21 2.0 MB
.____padding_file/269 2.0 MB
.____padding_file/66 2.0 MB
.____padding_file/29 2.0 MB
.____padding_file/52 2.0 MB
.____padding_file/248 2.0 MB
.____padding_file/10 2.0 MB
.____padding_file/20 2.0 MB
.____padding_file/211 2.0 MB
.____padding_file/1 2.0 MB
.____padding_file/166 2.0 MB
.____padding_file/109 2.0 MB
.____padding_file/209 1.9 MB
.____padding_file/39 1.9 MB
.____padding_file/222 1.9 MB
.____padding_file/279 1.9 MB
.____padding_file/181 1.9 MB
.____padding_file/186 1.9 MB
.____padding_file/0 1.9 MB
.____padding_file/15 1.9 MB
.____padding_file/167 1.9 MB
.____padding_file/306 1.9 MB
.____padding_file/177 1.9 MB
.____padding_file/55 1.9 MB
.____padding_file/49 1.9 MB
.____padding_file/18 1.9 MB
.____padding_file/227 1.9 MB
.____padding_file/243 1.9 MB
.____padding_file/120 1.9 MB
60. UART Driver Development Getting Started/2. Understanding the Requirements.mp4 1.8 MB
.____padding_file/254 1.8 MB
.____padding_file/305 1.8 MB
.____padding_file/88 1.8 MB
.____padding_file/51 1.8 MB
.____padding_file/239 1.8 MB
.____padding_file/208 1.8 MB
.____padding_file/135 1.8 MB
.____padding_file/46 1.8 MB
.____padding_file/293 1.8 MB
.____padding_file/288 1.8 MB
.____padding_file/117 1.8 MB
.____padding_file/184 1.7 MB
5. LEDButton Exercises using BSPs/2.1 STM32 Nucleo (64 pins) schematics.pdf.pdf 1.7 MB
.____padding_file/217 1.7 MB
.____padding_file/303 1.7 MB
.____padding_file/242 1.7 MB
.____padding_file/252 1.7 MB
.____padding_file/24 1.7 MB
.____padding_file/134 1.7 MB
.____padding_file/256 1.7 MB
.____padding_file/281 1.6 MB
.____padding_file/276 1.6 MB
.____padding_file/145 1.6 MB
.____padding_file/54 1.6 MB
.____padding_file/136 1.6 MB
.____padding_file/62 1.6 MB
45. I2C Driver Development Getting started/2. Understanding the Requirements.mp4 1.6 MB
.____padding_file/174 1.6 MB
.____padding_file/294 1.6 MB
.____padding_file/138 1.6 MB
.____padding_file/289 1.6 MB
.____padding_file/215 1.6 MB
.____padding_file/228 1.6 MB
.____padding_file/107 1.6 MB
47. I2C Driver Development Init Function/2. Code Implementation to EnableDisable I2C peripheral.mp4 1.6 MB
.____padding_file/111 1.5 MB
.____padding_file/304 1.5 MB
.____padding_file/241 1.5 MB
.____padding_file/191 1.5 MB
.____padding_file/188 1.5 MB
.____padding_file/94 1.5 MB
.____padding_file/114 1.5 MB
.____padding_file/123 1.5 MB
.____padding_file/95 1.5 MB
.____padding_file/218 1.5 MB
.____padding_file/43 1.5 MB
.____padding_file/275 1.5 MB
.____padding_file/162 1.5 MB
.____padding_file/86 1.5 MB
.____padding_file/247 1.5 MB
.____padding_file/266 1.5 MB
.____padding_file/220 1.4 MB
.____padding_file/35 1.4 MB
.____padding_file/168 1.4 MB
.____padding_file/64 1.4 MB
.____padding_file/16 1.4 MB
.____padding_file/84 1.4 MB
8. MCU Bus Interfaces/4.1 Using the STM32F2 and STM32F4 DMA controller.pdf.pdf 1.4 MB
.____padding_file/128 1.4 MB
.____padding_file/53 1.4 MB
.____padding_file/76 1.4 MB
.____padding_file/287 1.4 MB
.____padding_file/203 1.3 MB
.____padding_file/101 1.3 MB
.____padding_file/295 1.3 MB
.____padding_file/40 1.3 MB
.____padding_file/104 1.3 MB
.____padding_file/91 1.3 MB
.____padding_file/38 1.3 MB
.____padding_file/262 1.3 MB
.____padding_file/57 1.3 MB
.____padding_file/34 1.3 MB
.____padding_file/112 1.3 MB
.____padding_file/26 1.3 MB
.____padding_file/127 1.3 MB
.____padding_file/240 1.3 MB
.____padding_file/286 1.3 MB
.____padding_file/309 1.3 MB
.____padding_file/149 1.3 MB
.____padding_file/249 1.3 MB
.____padding_file/133 1.3 MB
.____padding_file/103 1.3 MB
.____padding_file/129 1.3 MB
.____padding_file/221 1.3 MB
.____padding_file/302 1.2 MB
.____padding_file/169 1.2 MB
52. Writing I2C sample application Getting ready/2. Understanding connection diagram.mp4 1.2 MB
.____padding_file/154 1.2 MB
.____padding_file/118 1.2 MB
.____padding_file/71 1.2 MB
.____padding_file/308 1.2 MB
.____padding_file/270 1.2 MB
.____padding_file/45 1.2 MB
.____padding_file/282 1.2 MB
.____padding_file/106 1.2 MB
.____padding_file/65 1.2 MB
.____padding_file/172 1.2 MB
.____padding_file/226 1.2 MB
5. LEDButton Exercises using BSPs/1.1 User_manual_STM32f407_Disc_kit.pdf.pdf 1.2 MB
.____padding_file/150 1.2 MB
.____padding_file/291 1.2 MB
.____padding_file/201 1.1 MB
.____padding_file/204 1.1 MB
.____padding_file/157 1.1 MB
.____padding_file/77 1.1 MB
.____padding_file/139 1.1 MB
.____padding_file/161 1.1 MB
.____padding_file/231 1.1 MB
.____padding_file/296 1.1 MB
.____padding_file/73 1.1 MB
.____padding_file/153 1.1 MB
.____padding_file/60 1.1 MB
.____padding_file/50 1.1 MB
.____padding_file/212 1.1 MB
.____padding_file/68 1.1 MB
.____padding_file/87 1.1 MB
.____padding_file/159 1.1 MB
.____padding_file/125 1.1 MB
.____padding_file/234 1.0 MB
.____padding_file/301 1.0 MB
.____padding_file/216 1.0 MB
.____padding_file/141 1.0 MB
.____padding_file/198 1.0 MB
.____padding_file/100 1.0 MB
.____padding_file/233 1023.5 KB
.____padding_file/11 1014.0 KB
.____padding_file/146 1008.7 KB
.____padding_file/182 987.6 KB
.____padding_file/200 980.9 KB
.____padding_file/92 975.6 KB
.____padding_file/197 971.9 KB
.____padding_file/108 961.6 KB
.____padding_file/179 944.7 KB
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/8.1 Hardware_Requirements.pdf_jp2.zip 939.2 KB
.____padding_file/30 934.7 KB
.____padding_file/224 931.9 KB
.____padding_file/93 930.5 KB
.____padding_file/44 925.9 KB
.____padding_file/58 924.1 KB
.____padding_file/147 917.3 KB
.____padding_file/47 913.8 KB
.____padding_file/63 895.3 KB
.____padding_file/185 891.3 KB
.____padding_file/176 867.4 KB
.____padding_file/246 863.6 KB
.____padding_file/195 840.7 KB
.____padding_file/214 837.4 KB
.____padding_file/170 827.0 KB
.____padding_file/48 808.2 KB
.____padding_file/244 808.0 KB
.____padding_file/259 807.6 KB
.____padding_file/223 801.3 KB
.____padding_file/33 800.3 KB
.____padding_file/98 789.8 KB
.____padding_file/79 785.1 KB
.____padding_file/173 778.4 KB
.____padding_file/263 765.9 KB
5. LEDButton Exercises using BSPs/1.1 User_manual_STM32f407_Disc_kit.pdf_djvu.xml 757.3 KB
.____padding_file/27 753.8 KB
.____padding_file/85 743.4 KB
.____padding_file/257 730.3 KB
.____padding_file/105 716.3 KB
.____padding_file/102 713.6 KB
8. MCU Bus Interfaces/4.1 Using the STM32F2 and STM32F4 DMA controller.pdf_abbyy.gz 703.8 KB
.____padding_file/72 702.4 KB
.____padding_file/131 701.7 KB
8. MCU Bus Interfaces/4.1 Using the STM32F2 and STM32F4 DMA controller.pdf_djvu.xml 689.0 KB
.____padding_file/116 688.0 KB
.____padding_file/189 674.1 KB
.____padding_file/193 668.8 KB
.____padding_file/148 667.3 KB
.____padding_file/151 658.0 KB
.____padding_file/126 640.1 KB
.____padding_file/13 636.4 KB
.____padding_file/137 629.5 KB
.____padding_file/155 623.2 KB
.____padding_file/37 618.3 KB
.____padding_file/236 613.2 KB
.____padding_file/297 612.8 KB
.____padding_file/277 610.7 KB
.____padding_file/121 605.6 KB
.____padding_file/165 592.8 KB
.____padding_file/140 590.1 KB
.____padding_file/264 574.7 KB
.____padding_file/194 568.4 KB
.____padding_file/196 562.8 KB
.____padding_file/144 560.9 KB
5. LEDButton Exercises using BSPs/1.1 User_manual_STM32f407_Disc_kit.pdf_abbyy.gz 540.9 KB
.____padding_file/171 539.8 KB
.____padding_file/83 533.4 KB
.____padding_file/70 519.6 KB
.____padding_file/237 512.1 KB
.____padding_file/260 489.0 KB
.____padding_file/36 484.5 KB
.____padding_file/31 466.5 KB
.____padding_file/67 464.4 KB
.____padding_file/274 462.8 KB
.____padding_file/61 454.3 KB
.____padding_file/290 450.7 KB
.____padding_file/250 447.4 KB
.____padding_file/272 440.5 KB
.____padding_file/75 423.4 KB
.____padding_file/245 420.6 KB
.____padding_file/113 417.7 KB
.____padding_file/225 408.0 KB
.____padding_file/14 386.0 KB
.____padding_file/78 381.2 KB
.____padding_file/180 355.4 KB
.____padding_file/115 350.9 KB
5. LEDButton Exercises using BSPs/2.1 STM32 Nucleo (64 pins) schematics.pdf_djvu.xml 348.3 KB
.____padding_file/202 341.3 KB
3. Eclipse Setup For ARM Cortex M based MCUs/2.1 Setting up Eclipse for ARM Cortex M processor based MCUs-Summary.pdf_jp2.zip 328.0 KB
.____padding_file/230 307.2 KB
.____padding_file/298 305.3 KB
.____padding_file/253 305.1 KB
.____padding_file/183 300.3 KB
.____padding_file/82 290.0 KB
.____padding_file/285 283.8 KB
.____padding_file/156 270.6 KB
.____padding_file/17 264.8 KB
.____padding_file/307 262.4 KB
.____padding_file/9 249.1 KB
.____padding_file/261 234.1 KB
.____padding_file/278 227.5 KB
.____padding_file/232 224.9 KB
.____padding_file/69 221.5 KB
.____padding_file/235 219.1 KB
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/8.1 Hardware_Requirements.pdf.pdf 206.9 KB
.____padding_file/205 197.3 KB
.____padding_file/219 173.4 KB
5. LEDButton Exercises using BSPs/2.1 STM32 Nucleo (64 pins) schematics.pdf_abbyy.gz 169.2 KB
.____padding_file/192 168.9 KB
.____padding_file/158 163.7 KB
.____padding_file/56 157.8 KB
.____padding_file/74 157.1 KB
.____padding_file/187 155.3 KB
.____padding_file/283 146.8 KB
.____padding_file/164 132.8 KB
.____padding_file/160 128.4 KB
.____padding_file/96 128.0 KB
[FreeCourseSite.com].Udemy.-.Mastering.Microcontroller.with.Embedded.Driver.Development.torrent 94.6 KB
.____padding_file/110 91.9 KB
.____padding_file/41 84.1 KB
.____padding_file/143 80.6 KB
.____padding_file/238 74.7 KB
.____padding_file/97 71.9 KB
.____padding_file/132 66.9 KB
.____padding_file/175 65.1 KB
.____padding_file/152 64.2 KB
.____padding_file/32 59.4 KB
8. MCU Bus Interfaces/4.1 Using the STM32F2 and STM32F4 DMA controller.pdf_djvu.txt 52.3 KB
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/8.1 Hardware_Requirements.pdf_abbyy.gz 51.4 KB
[FreeCourseSite.com].Udemy.-.Mastering.Microcontroller.with.Embedded.Driver.Development_torrent.txt 47.9 KB
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/8.1 Hardware_Requirements.pdf_djvu.xml 44.3 KB
3. Eclipse Setup For ARM Cortex M based MCUs/2.1 Setting up Eclipse for ARM Cortex M processor based MCUs-Summary.pdf.pdf 43.2 KB
.____padding_file/99 42.7 KB
5. LEDButton Exercises using BSPs/1.1 User_manual_STM32f407_Disc_kit.pdf_djvu.txt 41.0 KB
.____padding_file/28 35.8 KB
.____padding_file/229 28.1 KB
.____padding_file/124 25.6 KB
.____padding_file/130 24.7 KB
3. Eclipse Setup For ARM Cortex M based MCUs/2.1 Setting up Eclipse for ARM Cortex M processor based MCUs-Summary.pdf_abbyy.gz 14.7 KB
.____padding_file/280 14.1 KB
free-course-site.com.-udemy.-.-mastering.-microcontroller.with.-embedded.-driver.-development_meta.sqlite 11.0 KB
8. MCU Bus Interfaces/4.1 Using the STM32F2 and STM32F4 DMA controller.pdf_scandata.xml 10.8 KB
3. Eclipse Setup For ARM Cortex M based MCUs/2.1 Setting up Eclipse for ARM Cortex M processor based MCUs-Summary.pdf_djvu.xml 10.5 KB
5. LEDButton Exercises using BSPs/1.1 User_manual_STM32f407_Disc_kit.pdf_scandata.xml 10.2 KB
5. LEDButton Exercises using BSPs/2.1 STM32 Nucleo (64 pins) schematics.pdf_djvu.txt 9.1 KB
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/8. HardwareSoftware Requirements.html 6.6 KB
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/8.1 Hardware_Requirements.pdf_djvu.txt 3.5 KB
69. MCU Clocks Configurations and Measurements/6. Bonus Lecture.html 2.3 KB
1. Overview of the Course/3. IDE setup for Embedded Code Development.html 1.6 KB
5. LEDButton Exercises using BSPs/2.1 STM32 Nucleo (64 pins) schematics.pdf_scandata.xml 1.5 KB
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/8.1 Hardware_Requirements.pdf_scandata.xml 1.2 KB
[FreeCourseSite.com].txt 1.1 KB
[HaxTech.me].txt 1.1 KB
3. Eclipse Setup For ARM Cortex M based MCUs/2.1 Setting up Eclipse for ARM Cortex M processor based MCUs-Summary.pdf_djvu.txt 1.0 KB
free-course-site.com.-udemy.-.-mastering.-microcontroller.with.-embedded.-driver.-development_meta.xml 1.0 KB
3. Eclipse Setup For ARM Cortex M based MCUs/1. Note for the students.html 1011 bytes
3. Eclipse Setup For ARM Cortex M based MCUs/2. Section-Summary.html 964 bytes
3. Eclipse Setup For ARM Cortex M based MCUs/2.1 Setting up Eclipse for ARM Cortex M processor based MCUs-Summary.pdf_scandata.xml 603 bytes
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/1. Note for the students.html 467 bytes
1. Overview of the Course/2. Source Code.html 466 bytes
2. Development board used in our courses/1. Note for the students.html 370 bytes
4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/7.1 User Manual.html 233 bytes
15. GPIO Programming structure and Registers/11. Find Out IO Alt Functionality.html 166 bytes
18. GPIO Driver Development Implementing Init API/5. Embedded Coding Skill.html 166 bytes
21. GPIO Interrupt Handling/8. Find out IRQ number.html 166 bytes
21. GPIO Interrupt Handling/9. Interrupt Pending Bit.html 166 bytes
24. SPI Functional Block and Clock/3. Find out SPI Max Speed.html 166 bytes
31. SPI Driver Development Implementing TX ISR/5. Quiz about Debugging SPI Interrupt.html 166 bytes
37. I2C Essentials/3. Quiz SPI and I2C.html 166 bytes
44. I2C MasterSlave Communication/4. Quiz about I2C Master TX.html 166 bytes
44. I2C MasterSlave Communication/5. Quiz about I2C Master RX.html 166 bytes
57. UART Communication/3. UART Start bit Detection.html 166 bytes
59. UART Registers/5. Find out MAX baudrate of UART.html 166 bytes
69. MCU Clocks Configurations and Measurements/5. Quiz about using HSE.html 166 bytes
[FreeCourseSite.com].url 127 bytes
[HaxTech.me].url 123 bytes
2. Development board used in our courses/2.2 Discovery kit with STM32F407VG MCU.html 120 bytes
2. Development board used in our courses/2.1 STM32 Nucleo-64 development board.html 117 bytes
2. Development board used in our courses/4.1 ST-LINK, ST-LINKV2, ST-LINKV2-1 USB driver signed for Windows7, Windows8, Windows10.html 117 bytes
2. Development board used in our courses/5.1 ST-LINK, ST-LINKV2, ST-LINKV2-1 firmware upgrade.html 117 bytes

free-course-site.com.-udemy.-.-mastering.-microcontroller.with.-embedded.-driver.-development

File List

Download Torrent

Related Resources

Copyright Infringement