[ DevCourseWeb.com ] Udemy - Cavity casting aluminum and Mold design with solidworks
File List
- ~Get Your Files Here !/4. Creating the mold with Solidworks software/4. Completion of this Mold project.mp4 349.6 MB
- ~Get Your Files Here !/6. Project 2/6. Pins that turn the plate back, linear, injection pins and injection plate V-1.mp4 309.0 MB
- ~Get Your Files Here !/6. Project 2/7. Pins that turn the plate back, linear, injection pins and injection plate V-2.mp4 261.5 MB
- ~Get Your Files Here !/6. Project 2/5. Creating the mold with the Solidworks software pr-2.mp4 235.3 MB
- ~Get Your Files Here !/6. Project 2/3. The design of the filling system, the gate and the feeder.mp4 213.1 MB
- ~Get Your Files Here !/3. Design & cavity casting process and simulation/3. The design of the filling system, the gate and the feeder Video-2.mp4 209.6 MB
- ~Get Your Files Here !/4. Creating the mold with Solidworks software/3. Creating pins that turn the plate back, linear and injection plate..mp4 199.7 MB
- ~Get Your Files Here !/4. Creating the mold with Solidworks software/5. Mold guide pins and opening hole for set up mold.mp4 176.5 MB
- ~Get Your Files Here !/8. Project 3/2. The design of the filling system, the gate and the feeder and analysis.mp4 164.9 MB
- ~Get Your Files Here !/8. Project 3/4. Creating the mold with the Solidworks software.mp4 150.1 MB
- ~Get Your Files Here !/4. Creating the mold with Solidworks software/1. Creating the mold with the Solidworks software.mp4 139.3 MB
- ~Get Your Files Here !/4. Creating the mold with Solidworks software/2. Placement of injection pins as well as shrinking of the aluminum.mp4 133.3 MB
- ~Get Your Files Here !/3. Design & cavity casting process and simulation/2. The design of the filling system, the gate and the feeder Video-1.mp4 120.0 MB
- ~Get Your Files Here !/2. How to modify a part and prepare it for designing a mold/2. Draft Analysis and change of slope angle..mp4 115.1 MB
- ~Get Your Files Here !/6. Project 2/8. Checking that everything is properly with the mold and motion for this product.mp4 95.0 MB
- ~Get Your Files Here !/8. Project 3/1. Information about the third project.mp4 91.6 MB
- ~Get Your Files Here !/2. How to modify a part and prepare it for designing a mold/3. Preparation of the part to proceed with the mold.mp4 89.8 MB
- ~Get Your Files Here !/8. Project 3/3. Creating the mold for sand with the Solidworks software.mp4 86.4 MB
- ~Get Your Files Here !/6. Project 2/4. Comparison of the aluminum flow results of the project with minor changes.mp4 79.3 MB
- ~Get Your Files Here !/3. Design & cavity casting process and simulation/6. The second and third simulation with the Inspire Cast software.mp4 79.0 MB
- ~Get Your Files Here !/3. Design & cavity casting process and simulation/8. Solidification Results.mp4 69.1 MB
- ~Get Your Files Here !/3. Design & cavity casting process and simulation/5. First simulation with the Inspire Cast software.mp4 66.6 MB
- ~Get Your Files Here !/3. Design & cavity casting process and simulation/7. Filling Results.mp4 66.4 MB
- ~Get Your Files Here !/2. How to modify a part and prepare it for designing a mold/1. Thickness analysis.mp4 56.8 MB
- ~Get Your Files Here !/6. Project 2/1. Basic knowledge of the part before starting the project.mp4 54.3 MB
- ~Get Your Files Here !/3. Design & cavity casting process and simulation/1. The rules and basic knowledge of the cavity casting process.mp4 43.7 MB
- ~Get Your Files Here !/1. How to create the cavity in different ways/3. How to make a Mold with Surface..mp4 43.7 MB
- ~Get Your Files Here !/1. How to create the cavity in different ways/5. How to make a mold with Indent command..mp4 36.9 MB
- ~Get Your Files Here !/1. How to create the cavity in different ways/6. How to make cavity in solidworks assembly..mp4 36.1 MB
- ~Get Your Files Here !/6. Project 2/2. Shrinking the aluminum and planning how the aluminum will flow..mp4 35.3 MB
- ~Get Your Files Here !/1. How to create the cavity in different ways/2. Making a simple part to continue how to make a cavity casting mold.mp4 35.0 MB
- ~Get Your Files Here !/1. How to create the cavity in different ways/7. How to make a Mold with combine..mp4 29.5 MB
- ~Get Your Files Here !/1. How to create the cavity in different ways/4. How to make mold tools with solidworks command.mp4 15.7 MB
- ~Get Your Files Here !/3. Design & cavity casting process and simulation/4. Basic information for aluminum simulation for cavity casting.mp4 13.1 MB
- ~Get Your Files Here !/7. The file of the second project/1.1 Pr-2.SLDPRT 9.8 MB
- ~Get Your Files Here !/1. How to create the cavity in different ways/1.1 image_6483441 (4).JPG 6.0 MB
- ~Get Your Files Here !/9. The file of the third project/1.1 Pr-3.SLDPRT 3.2 MB
- ~Get Your Files Here !/5. The file of the first project/1.1 The first project.SLDPRT 2.3 MB
- ~Get Your Files Here !/7. The file of the second project/1.2 Pr-2.x_t 2.0 MB
- ~Get Your Files Here !/9. The file of the third project/1.2 Pr-3.x_t 1.6 MB
- ~Get Your Files Here !/5. The file of the first project/1.2 The first project.SLDPRT.x_t 1.1 MB
- ~Get Your Files Here !/Bonus Resources.txt 386 bytes
- Get Bonus Downloads Here.url 182 bytes
- ~Get Your Files Here !/1. How to create the cavity in different ways/1. Shortcut keyboard in solidworks.html 38 bytes
- ~Get Your Files Here !/5. The file of the first project/1. Project 1.html 16 bytes
- ~Get Your Files Here !/7. The file of the second project/1. Project 2.html 16 bytes
- ~Get Your Files Here !/9. The file of the third project/1. Project 3.html 16 bytes
Download Torrent
Related Resources
Copyright Infringement
If the content above is not authorized, please contact us via anywarmservice[AT]gmail.com. Remember to include the full url in your complaint.