[Tutorialsplanet.NET] Udemy - Tech Explorations™ Make an Open Source Drone

Creation Time	Oct. 5, 2023, 10:50 p.m.
Last Access Time	Nov. 14, 2024, 9:31 a.m.
File Size	5.3 GB
Keywords	Tutorialsplanet Explorations™ Make - Udemy Source Drone Tech NET an Open
Total Requests	96
Total Files	174
Magnet Link	Please wait ...
	Download (Magnet Link) Play (Watch Online)

13. An upgrade using the Pixhawk flight controller/12. 840i - Battery and power connections.mp4 417.2 MB
2. Multi-copter drone basics/2. Types of multi-rotor drones.mp4 264.0 MB
13. An upgrade using the Pixhawk flight controller/8. 840d - Assembly Part 4 - GPS antenna.mp4 247.0 MB
13. An upgrade using the Pixhawk flight controller/2. 810 - Why upgrade- The Pixhawk flight controller.mp4 240.5 MB
13. An upgrade using the Pixhawk flight controller/15. 860 - Calibration and test flight.mp4 221.5 MB
13. An upgrade using the Pixhawk flight controller/11. 840g - Assembly Part 7 - Wirings.mp4 196.0 MB
13. An upgrade using the Pixhawk flight controller/10. 840f - Assembly Part 6 - Buzzer, safety button, power module.mp4 188.7 MB
13. An upgrade using the Pixhawk flight controller/7. 840c - Assembly Part 3 - Pixhawk base.mp4 174.5 MB
13. An upgrade using the Pixhawk flight controller/6. 840b - Assembly Part 2 - ESC red wire insulation.mp4 169.2 MB
13. An upgrade using the Pixhawk flight controller/13. 840h - Verify wiring in Mission Planner.mp4 164.3 MB
13. An upgrade using the Pixhawk flight controller/4. 830 - A review of the upgrade components.mp4 163.8 MB
13. An upgrade using the Pixhawk flight controller/14. 850 - Attach the propellers.mp4 162.6 MB
4. Power distribution board assembly/4. Solder the battery wires and connectors.mp4 160.1 MB
13. An upgrade using the Pixhawk flight controller/9. 840e - Assembly Part 5 - Pixhawk assembly.mp4 157.5 MB
12. Test flight!/3. The first flight.mp4 146.5 MB
13. An upgrade using the Pixhawk flight controller/5. 840a - Assembly Part 1 - Propellers.mp4 137.9 MB
6. Flight controller and peripherals/10. Connect ESCs to flight controller.mp4 126.7 MB
3. ESC and motors/3. Attach the connectors to the ESC wires.mp4 117.8 MB
6. Flight controller and peripherals/5. Connect the GPS module to the flight controller, Part 1.mp4 102.1 MB
9. The transmitter/3. Understand the transmitter basic operations.mp4 90.5 MB
2. Multi-copter drone basics/8. Battery and charger, Part 1.mp4 83.2 MB
6. Flight controller and peripherals/9. Attach flight controller to chassis.mp4 81.5 MB
13. An upgrade using the Pixhawk flight controller/3. 820 - Disassembly.mp4 79.4 MB
1. Introduction/1. What is this course about.mp4 79.3 MB
7. Battery and charger/2. How to charge the battery.mp4 78.7 MB
6. Flight controller and peripherals/4. Setup radio receiver and flight controller to use PWM.mp4 75.9 MB
4. Power distribution board assembly/3. Solder the ESC power wires.mp4 70.8 MB
11. Getting ready to fly/3. Attach the propellers.mp4 63.4 MB
6. Flight controller and peripherals/8. Connect the GPS module to the flight controller, Part 4.mp4 59.6 MB
2. Multi-copter drone basics/7. Propellers.mp4 59.4 MB
13. An upgrade using the Pixhawk flight controller/1. 800 - Section introduction.mp4 58.9 MB
12. Test flight!/2. Pre-flight checks.mp4 58.5 MB
5. Main body assembly/3. Attach the arms to the power distribution board, Part 1.mp4 57.4 MB
3. ESC and motors/4. Attach connectors to motor wires.mp4 57.4 MB
7. Battery and charger/3. Attach the battery to the frame.mp4 52.4 MB
2. Multi-copter drone basics/10. Flight controller and its peripherals.mp4 46.6 MB
6. Flight controller and peripherals/3. The PWM and PPM signalling options, Part 2.mp4 43.2 MB
2. Multi-copter drone basics/11. Other tools and things.mp4 41.7 MB
6. Flight controller and peripherals/2. The PWM and PPM signalling options, Part 1.mp4 40.9 MB
2. Multi-copter drone basics/9. Battery and charger, Part 2.mp4 40.5 MB
2. Multi-copter drone basics/5. Procuring the right parts.mp4 39.9 MB
11. Getting ready to fly/2. Calibrate the ESCs.mp4 36.6 MB
5. Main body assembly/2. Attach the motors to the arms.mp4 35.7 MB
2. Multi-copter drone basics/3. Roll, pitch, yaw.mp4 35.4 MB
6. Flight controller and peripherals/6. Connect the GPS module to the flight controller, Part 2.mp4 32.3 MB
5. Main body assembly/4. Attach the arms to the power distribution board, Part 2.mp4 31.3 MB
3. ESC and motors/2. Preparation.mp4 30.9 MB
2. Multi-copter drone basics/4. Controlling the motors.mp4 30.3 MB
11. Getting ready to fly/4. Safety and legal issues.mp4 24.8 MB
4. Power distribution board assembly/2. About the power distribution board.mp4 23.5 MB
6. Flight controller and peripherals/7. Connect the GPS module to the flight controller, Part 3.mp4 21.9 MB
10. Mission Planner/3. Mission Planner setup, Part 1.mp4 20.7 MB
10. Mission Planner/2. Download and install Mission Planner.mp4 18.2 MB
9. The transmitter/2. Binding receiver and transmitter.mp4 17.9 MB
8. The firmware/2. Clear the EEPROM.mp4 13.9 MB
2. Multi-copter drone basics/1. Introduction.mp4 13.9 MB
10. Mission Planner/4. Mission Planner setup, Part 2.mp4 11.7 MB
14. Conclusion/1. What's next.mp4 10.6 MB
2. Multi-copter drone basics/6. Terminology.mp4 10.4 MB
12. Test flight!/4. Conclusion.mp4 9.6 MB
11. Getting ready to fly/1. Introduction.mp4 9.2 MB
3. ESC and motors/5. Conclusion.mp4 8.5 MB
8. The firmware/3. Download and install the firmware.mp4 7.5 MB
10. Mission Planner/5. Test the GPS module.mp4 7.2 MB
2. Multi-copter drone basics/12. Conclusion.mp4 7.0 MB
6. Flight controller and peripherals/1. Introduction.mp4 6.0 MB
3. ESC and motors/1. Introduction.mp4 5.9 MB
6. Flight controller and peripherals/11. Conclusion.mp4 5.8 MB
4. Power distribution board assembly/1. Introduction.mp4 5.5 MB
5. Main body assembly/5. Conclusion.mp4 5.0 MB
4. Power distribution board assembly/5. Conclusion.mp4 4.1 MB
8. The firmware/1. Introduction.mp4 4.1 MB
10. Mission Planner/1. Introduction.mp4 4.1 MB
5. Main body assembly/1. Introduction.mp4 3.6 MB
11. Getting ready to fly/1. Introduction.vtt 2.9 MB
7. Battery and charger/1. Introduction.mp4 2.9 MB
10. Mission Planner/6. Conclusion.mp4 2.5 MB
9. The transmitter/4. Conclusion.mp4 2.5 MB
8. The firmware/4. Conclusion.mp4 2.4 MB
9. The transmitter/1. Introduction.mp4 2.4 MB
12. Test flight!/1. Introduction.mp4 2.3 MB
1. Introduction/2.1 Make an Open Source Drone - Parts used v2.pdf.pdf 2.1 MB
11. Getting ready to fly/5. Conclusion.mp4 2.0 MB
7. Battery and charger/4. Conclusion.mp4 1.8 MB
1. Introduction/2.2 Make an Open Source Drone - Tools used.pdf.pdf 1.4 MB
12. Test flight!/2.1 Make an Open Source Drone - Preflight Check.pdf.pdf 29.1 KB
11. Getting ready to fly/2.1 Make an Open Source Drone - ESC calibration process.pdf.pdf 29.1 KB
2. Multi-copter drone basics/5. Procuring the right parts.vtt 16.3 KB
11. Getting ready to fly/4. Safety and legal issues.vtt 14.4 KB
13. An upgrade using the Pixhawk flight controller/12. 840i - Battery and power connections.vtt 13.9 KB
4. Power distribution board assembly/4. Solder the battery wires and connectors.vtt 12.2 KB
13. An upgrade using the Pixhawk flight controller/2. 810 - Why upgrade- The Pixhawk flight controller.vtt 12.1 KB
2. Multi-copter drone basics/2. Types of multi-rotor drones.vtt 11.4 KB
7. Battery and charger/2. How to charge the battery.vtt 11.3 KB
3. ESC and motors/3. Attach the connectors to the ESC wires.vtt 9.6 KB
2. Multi-copter drone basics/8. Battery and charger, Part 1.vtt 9.2 KB
6. Flight controller and peripherals/10. Connect ESCs to flight controller.vtt 9.0 KB
13. An upgrade using the Pixhawk flight controller/13. 840h - Verify wiring in Mission Planner.vtt 8.7 KB
2. Multi-copter drone basics/7. Propellers.vtt 8.6 KB
9. The transmitter/3. Understand the transmitter basic operations.vtt 8.5 KB
6. Flight controller and peripherals/5. Connect the GPS module to the flight controller, Part 1.vtt 8.5 KB
13. An upgrade using the Pixhawk flight controller/15. 860 - Calibration and test flight.vtt 8.2 KB
13. An upgrade using the Pixhawk flight controller/8. 840d - Assembly Part 4 - GPS antenna.vtt 8.0 KB
6. Flight controller and peripherals/3. The PWM and PPM signalling options, Part 2.vtt 7.9 KB
2. Multi-copter drone basics/9. Battery and charger, Part 2.vtt 7.7 KB
10. Mission Planner/4. Mission Planner setup, Part 2.vtt 7.5 KB
2. Multi-copter drone basics/6. Terminology.vtt 7.4 KB
13. An upgrade using the Pixhawk flight controller/4. 830 - A review of the upgrade components.vtt 7.3 KB
6. Flight controller and peripherals/9. Attach flight controller to chassis.vtt 6.8 KB
6. Flight controller and peripherals/4. Setup radio receiver and flight controller to use PWM.vtt 6.7 KB
13. An upgrade using the Pixhawk flight controller/11. 840g - Assembly Part 7 - Wirings.vtt 6.7 KB
10. Mission Planner/3. Mission Planner setup, Part 1.vtt 6.4 KB
11. Getting ready to fly/3. Attach the propellers.vtt 6.4 KB
12. Test flight!/3. The first flight.vtt 6.3 KB
13. An upgrade using the Pixhawk flight controller/7. 840c - Assembly Part 3 - Pixhawk base.vtt 6.2 KB
13. An upgrade using the Pixhawk flight controller/10. 840f - Assembly Part 6 - Buzzer, safety button, power module.vtt 5.9 KB
13. An upgrade using the Pixhawk flight controller/9. 840e - Assembly Part 5 - Pixhawk assembly.vtt 5.6 KB
2. Multi-copter drone basics/11. Other tools and things.vtt 5.6 KB
13. An upgrade using the Pixhawk flight controller/6. 840b - Assembly Part 2 - ESC red wire insulation.vtt 5.6 KB
13. An upgrade using the Pixhawk flight controller/14. 850 - Attach the propellers.vtt 5.6 KB
2. Multi-copter drone basics/4. Controlling the motors.vtt 5.3 KB
13. An upgrade using the Pixhawk flight controller/5. 840a - Assembly Part 1 - Propellers.vtt 5.2 KB
2. Multi-copter drone basics/3. Roll, pitch, yaw.vtt 5.2 KB
5. Main body assembly/3. Attach the arms to the power distribution board, Part 1.vtt 5.1 KB
11. Getting ready to fly/2. Calibrate the ESCs.vtt 4.8 KB
7. Battery and charger/3. Attach the battery to the frame.vtt 4.6 KB
6. Flight controller and peripherals/2. The PWM and PPM signalling options, Part 1.vtt 4.3 KB
2. Multi-copter drone basics/10. Flight controller and its peripherals.vtt 4.2 KB
14. Conclusion/2. Other educational content from Tech Explorations.html 4.2 KB
10. Mission Planner/2. Download and install Mission Planner.vtt 4.1 KB
12. Test flight!/2. Pre-flight checks.vtt 4.1 KB
4. Power distribution board assembly/3. Solder the ESC power wires.vtt 4.0 KB
1. Introduction/1. What is this course about.vtt 3.7 KB
3. ESC and motors/4. Attach connectors to motor wires.vtt 3.5 KB
3. ESC and motors/2. Preparation.vtt 3.3 KB
8. The firmware/3. Download and install the firmware.vtt 3.3 KB
5. Main body assembly/2. Attach the motors to the arms.vtt 3.2 KB
13. An upgrade using the Pixhawk flight controller/3. 820 - Disassembly.vtt 3.2 KB
6. Flight controller and peripherals/8. Connect the GPS module to the flight controller, Part 4.vtt 2.9 KB
9. The transmitter/2. Binding receiver and transmitter.vtt 2.7 KB
13. An upgrade using the Pixhawk flight controller/1. 800 - Section introduction.vtt 2.7 KB
5. Main body assembly/4. Attach the arms to the power distribution board, Part 2.vtt 2.4 KB
8. The firmware/2. Clear the EEPROM.vtt 2.3 KB
4. Power distribution board assembly/2. About the power distribution board.vtt 2.3 KB
2. Multi-copter drone basics/1. Introduction.vtt 2.1 KB
6. Flight controller and peripherals/6. Connect the GPS module to the flight controller, Part 2.vtt 1.9 KB
6. Flight controller and peripherals/7. Connect the GPS module to the flight controller, Part 3.vtt 1.9 KB
14. Conclusion/1. What's next.vtt 1.7 KB
6. Flight controller and peripherals/1. Introduction.vtt 1.2 KB
10. Mission Planner/5. Test the GPS module.vtt 1.1 KB
2. Multi-copter drone basics/12. Conclusion.vtt 1.1 KB
6. Flight controller and peripherals/11. Conclusion.vtt 1.0 KB
3. ESC and motors/5. Conclusion.vtt 1.0 KB
8. The firmware/2.1 EEPROM_clear.zip.zip 958 bytes
12. Test flight!/4. Conclusion.vtt 920 bytes
5. Main body assembly/5. Conclusion.vtt 848 bytes
8. The firmware/1. Introduction.vtt 818 bytes
1. Introduction/3. Crius or Pixhawk Read this before you continue.html 736 bytes
4. Power distribution board assembly/1. Introduction.vtt 730 bytes
10. Mission Planner/1. Introduction.vtt 698 bytes
3. ESC and motors/1. Introduction.vtt 656 bytes
5. Main body assembly/1. Introduction.vtt 606 bytes
9. The transmitter/1. Introduction.vtt 594 bytes
10. Mission Planner/6. Conclusion.vtt 565 bytes
8. The firmware/4. Conclusion.vtt 537 bytes
9. The transmitter/4. Conclusion.vtt 535 bytes
4. Power distribution board assembly/5. Conclusion.vtt 514 bytes
11. Getting ready to fly/5. Conclusion.vtt 463 bytes
12. Test flight!/1. Introduction.vtt 411 bytes
7. Battery and charger/4. Conclusion.vtt 379 bytes
7. Battery and charger/1. Introduction.vtt 371 bytes
1. Introduction/2. Parts and Tools.html 271 bytes
[Tutorialsplanet.NET].url 128 bytes
1. Introduction/2.3 List of tools and parts.html 108 bytes

[Tutorialsplanet.NET] Udemy - Tech Explorations™ Make an Open Source Drone

File List

Download Torrent

Related Resources

Copyright Infringement